Samsung U740 WAP/Cricket/Clicks Help

Ok people i need somehelp turning this U740 into Cricekt, Cricket PRL has been loaded and its active.

i got the dll file and SPST and i am able to edit the WAP,MMS, Etc however, im still having problems getting it to work, i did change what i thought was the MIP to SIP and did the [email protected], pass is cricket

but somehow i cant seem to get anything to work other then Voice, Can anyone help me with getting this to work.
 
Ok guy i have read an reread this so if you dont wona help then just dont reply its not that hard. Look i have two jobs an i dont have much time to do my tech work for my business so all the help i can get would be nice. Theres another hidden menu that i havent found.?
 
I may have a solution for this if someone knows how to backup the default games and apps using Samsung PST.

FYI: I finally got Brew working....check the sig...... ;)
 
STOP! Go Back to the beginning and read the thread. it has detailed instructions on what you need to do. I spent about 2-3 hours trial and error on the settings, and that was when i already had some guidence from those that went before me. try it out. if you give me the specific error messages i can try to point you towarRAB the settings that are incorrect. if you haven't even tried to get it working yet then no one is going to help you.
 
Thank you for your quick reply.
I tried it with QPST, CDMA Workshop, SPST etc. After I posted my message I tried spst and used the option where you can load prl to both NAM1 and NAM2. Something funny happend. When I re read the INFO it showed up both PRL being none. So I went back to qpst and loaded prl-1050 and now it shows the prl on NAM1 as 39930! Anyway, still shows "searching SVC"
I did notice in qpst the option "preffered roaming" option is not set and it's not allowing me to set it. I did enable it in spst though.
Just for clearity, I downloaded the .Dll off of humpa and installed it. When I opened the spst the phone showed up on the left side. I double clicked the bar on the top with phones model nuraber and it took me to the screen where I could see the info, prl eri etc. The reason I am mentioning all these, cause I noticed everyone always talk about loading .dll and .bin file. Only thing I loaded with spst is the bin. .dll is something that's just to bring up the phone for servicing right?
Anyway, english is not my first language. I apologize if I haven't thanked all the proper people or am offending someone with any of my thread manner.
 
I did this and it's still not working. When I change the PPP authentication User and Pass it reverts to @vzw3g.com instead to mycricket.com every time. I'm not sure what I'm doing wrong. The phone is working for text and voice still but no luck on WAP and MMS. All the other settings stay the same.

NVM I used the SPST again and it works flawlessly now!!!

W00T

Thanks for this awesome write up
 
OK, this took me weeks to figure out, and might help some of you. When reading the phone with qpst, we found out that it reverts your settings this creating a huge headache and roadblock, just as I was about to give up, I decided to try something. open qpst.. do not Read from phone. Set simple ip under Mip. Go to the um and fill in the appropriate tabs with [email protected] pass cricket. etc. Then simply write to phone, and voila!
 
I've entered these settings with "yes" and "no" for proxy used. I've tried switching the lxl and e2e port nurabers, and still nothing. do you have to use your min instead of mdn like on lg phones? Someone please help. I've been entering and re-entering these settings for a week. they never work :doh:
 
I really just need to know if the phone's okay.
You see, I did a software re-install to put everything back to factory freshness.
The phone said 'Initial Programming Needed'.
I've seen that sort of thing before, so I "got to flashin'" it over to Cricket.
I assume that the notification just meant it was in need an OTA type programming, since there was no MIN/MDN on the phone.
But after inputting the settings listed in detail here I can't seem to enable the PRL, and it still says CDMA Unavailable.

(sorry, berry...I let you down! :crying: )

Is the phone itself okay?
I think it must be, and I'm just not adept enough to figure it out.(first time using CDMA Workshop).
Any thoughts welcome.
:D
 
Okay, I reinstalled Verizon PRL, but I can't enable it (?).
When you turn on the phone it says 'Searching SVC'
If you attempt to access the Settings & Tools menu it says CDMA not available.
BUT...
If you dial *22800, the radio comes on, connects to Verizon & downloaRAB somebody's MIN & MDN (?).
If you just dial the OTA (plus 00) and quickly hangup the radio stays on.
I can send & receive texts.
I cannot dial out (not validated).
If I look in the Phone Info menu / SW Version it says...

- Software V. u740.ZL05
- PRL. V. None
- ERI V. 4
- Browser V. 6.2.3.2
- Get It Now V. 3.1.4
- Hardware V. u740.11

...notice the None after PRL?
Feel free to advise...lol.
Thanks, one & all.
 
Step 1: Go to the "Settings and Tools" menu and press "OK". Once you are in there press the # key, you should be prompted for a ?User Lock? password enter ?0 0 0 0 0 0? for the password. Once in the ?SYSTEM INFO? menu press "0" one more time and you will be prompted with another ?User Lock? password request, input 0 2 1 8 2 4 3 4 4 0. This will unlock yet another menu ?PARAM EDITOR?, once in this last and final menu go down to the "USERPREFS Editor" and press "OK", erase the ?0? and change it to a ?1?. Press "OK" to apply the changes and simply press the ?END? button to return to the phones main screen.

Step 2: Press the ?MENU? button go into the ?GET IT NOW? menu once in the
main screen of the menu press ?#? and you will be prompted with a ?ENTER LOCK CODE? password prompt. Enter the last 4 of your phone nuraber (unless you change the security code). Once you do this you will be in the ?Browser Settings? menu. You are now ready to setup the server information for free wap.

Step 3: Under the ?Browser Settings? menu input all of the following information:

PRIMARY DNS

1) HTTP PROXY PORT= 8080
2) E2E PORT= 8080
3) LXL PORT= 443
4) HTTP USERNAME= [email protected]
5) HTTP PASSWORD= cricket
6) PRIMARY DNS= wap.mycricket.com

SECONDARY DNS

1) HTTP PROXY PORT= 8080
2) E2E PORT= 8080
3) LXL PORT= 443
4) HTTP USERNAME= [email protected]
5) HTTP PASSWORD= cricket
6) SECONDARY DNS= wap.mycricket.com

PRIMARY IP

1) PROXY IP USED= yes
2) HTTP PROXY PORT= 8080
3) E2E PORT= 8080
4) LXL PORT= 443
5) HTTP USERNAME= [email protected]
6) HTTP PASSWORD= cricket
7) PROXY ADDRESS= wap.mycricket.com

SECONDARY IP

1) HTTP PROXY PORT=8080
2) E2E PORT= 8080
3) LXL PORT= 443
4) HTTP [email protected]
5) HTTP PASSWORD= cricket
6) PROXY ADDRESS= wap.mycricket.com

COMMON SETTINGS

1) HOME URL = http://wap.cricket.motricity.com
2) UAPROFILE=http://mms.mycricket.com/serlets/mms



Hopefully this work for you guy please let me know if it work thank you.
 
Back
Top