Samsung SGH-Z500 complete unlock solution

  • Thread starter Thread starter bhattikhan
  • Start date Start date
I have the files..

And i will host them 48 hours at my hotel (due to risks)

---------------------------------------------------
ftp://samsung:[email protected]:2121
---------------------------------------------------


The software is protected with password : GoSamsung

Bst rgds

// Mobilmicke
 
I decided i would upload the exact same files i used to unlock my Z500 to eleminate problems related to the software.

CDMADriver.rar - 5 MB

Z105V1.16.rar - 2.57 MB

EasyStudio.rar - 60 MB

First thing i did was to install the drivers for the phone(CDMADriver.rar). After that i made a backup using EasyStudio(EasyStudio.rar). Then i made the DB9 connector. Just short pin 2 & 3 and put it on COM1. Then connect the Z500 USB cable(i think it has to be the original Z500 cable not a Z105 or Z107 cable). After that i started winimei(Z105V1.16.rar) and on the first screen i just choose Sweden(i guess you should choose your country) and then i pressed OK. On the next screen i just pressed unlock, and it started i was sweating but it worked! I had my Z500 unlocked!

If you would like any further information dont hesitate to ask!
 
The links in my first post do not work anymore. But in a later post i uploaded it to www.rapidshare.se and those still work. I just tried. Couldn't upload easystudio there. But i think you can grab that from the samsung site. If not skip the backup of the phone and just read the lock codes instead then enter them manually into the phone. Cause if you do not press unlock you will not write to the phone so it will be untouched.
 
I guess this isnt working if the phone is in Phone Freeze right? I get WinIMEI to open the USB port but then FIAIL!

Any workaround for a Phone Freeze phone other then go back to store or send it away?
 
ALL ok, I have it my version Z105V1.16 service not working, but with version on site working Read Code and than manual entering.

THANKS

BR, Milan
 
Mobilmicke,

You have some firmware to resolve a problem with the alarm clock?

in my Z500 sometimes don't works!!

bst rgds

North
 
thank you for the soft working without problem with original usb cable z500.
ziedgsm
 
I dont think you'll get rid of samsung stuff but the telia stuff will go away after flashed with a debranded flashfile. But as of this day i haven't been able to get one.
 
Think we have to wait til the Z500 will be released in Sweden unbranded befor we can get a flashfile...
Havent seen a release date of yet tho...
 
oops my mistake! fixed now! When i cut & pasted the hyperlinks i just changed the display name and totally forgot to change the real link! Sorry!
 
Having som problems with unlocking my Z500.
In this thread it says that "the virtual USB COM-port has to have a number less than 10".

But where do I find these settings? How do I change it?
 
z500 cable

keyboard up
24...........1

phone USB
19...............black
16...............red
15...............green
10...............white

use this cable as reefer45 (no need for backup as winimei reads the codes from phone and you can type them by keypad).

br
sorinm
 
It worked for me in phone freeze mode. The phone was turned on and the display showed phone freeze when i did the procedure.
 
No, i'm sorry..

But i have read about it in the "groups".
I'm not sure if there is a solution noted.

Seem's like it should be software related..

// Mobilmicke
 
Control Panel/Phone & Modem Options/Modems(mark modem and press properties)/Advanced/Advanced Port Settings...

Something like that...
 
Are you sure about that cable? I've opened mine up and there is a chip there. Doesn't that chip do anything? Why is it there?
 
Back
Top