samsung s5230 after flashing by multiloader dead

[sinyvfr]

i flashing today samsung s5230 by multiloader and before flash factoryfs show error,phone now is dead and can't go in download mode-how solve this problem?
best regards

 

[ramazoti10]

if you cant go to download mode then problem bootlaoder contact elco to repair

 

[sen-i]

battery charge and all will be ok

 

[Salami1_1]

charge batt in another phone. Then try to get into download mode, if it fails you need JTag to fix it.

 

[newerno]

Download Start Ch[0]
Bcmboot 55.1KB OK[0.2s]
ERR : NAK_VERIFY_FAILED 0
ERR : Boot2 Erase

 

[newerno]

i dead today samsung s5230

 

[layna]

are you using the right firmware and right version of multiloader ?



i was flashing several s5230 from telcel mexico without problem

 

[Salami1_1]

He f**ked his boot loader as you can see in the log he posted.. his s5230 is dead.. only way to fix is using JTAG..

B.r.

 

[armanhosting]

same problem here phone now is totally dead cant go in download mode......wish that have box that can support this problem to write boot without jtag only rj45......

 

[newerno]

very hard write file jtag?

 

[layna]

f**ked ? , are you mad or bitter or something like that



peace man

 

[moecow]

am also facing the seam proplem

 

[karwanyhata]

me tooo same here can not get bootloader

 

[Salami1_1]

eeh no???? this is not pointed at any person my friend its just another way of saying:
'he damaged his boot loader very much' alias of saying that is 'he ****ed his bootloader' or 'he screwed his bootloader' etc .. nothing to do with the person but with the bootloader as now this is damaged beyond easy repair.

using jtag is not super difficult.. you do need to take apart the phone a bit (jtag is connected directly to pcb)

B.r.

 

[habeebo]

any new about s5230 killed phone...

 

[layna]

yeah, that's right and you are right

my mistake

best wishes .

 

[yozzer]

Here is the proper way to flash for S5230.

Use MultiDownloader from attachment. Select "BRCM2133" from radio buttons. Connect phone in "Download Mode" (press volume up + camera + power on) with usb cable and install drivers if need. Press "Port Search".
Check "Boot Change" and "Full Download". Press "Boot" button and select folder with boot files from uncompressed firmware. Select amss, rsrc1, rsrc2 and factory fota. !!! For rsrc2 use ....(Low)... file, otherwise phone may not power on. Press "Download" and wait. After procedure is finished phone will boot and be ready for use.
If anyone want, can make pre-configuration. For this follow these steps:
1. Inset *#6984125*# from keyboard.
2. Select "Pre-configuration" from menu
3. For "Operator code" insert *#73561*# (click on field to get keyboard), press "Done" , press "Confirm"
4. Select what You want and press "Install". Phone will restart.
!!! WARNING !!! With pre-configuration You will lost all data from phone, make a backup on important data first !

 

[sanam]

try with z3x 100% working

 

[sameenshah123]

here is free slution
http://forum.gsmhosting.com/vbb/f286/repair-dead-boot-s5230-ns-com-port-100-a-938507/

 

[sameenshah123]

wait my friend elco is makeing slution to repair this phone with software. wait for next updat.e hope he will add it. as u can see in nespro there is no option fro flashing coz most of time its damege bootloader.