Samsung pixon calibration problem?

T

TTC #1 (yn)

New member
Hello, I have a samsung pixon had it for a year or so.
Recently it has been playing up, it is fine but sometimes it freezes so i cant touch anything on the touch screen. then goes back to normal then suddenly the calibration goes weird, its like to press a button at the top of the screen or so i need to press on the screen real low down, how do i fix this please? thanks :)
 
hi , ive got this exact same problem , ive had it before and i took it into shop and they sent it off to samsung to get fixed , when i got it bk it was fine but last week its started doing it again , ive reset the calibration multiple times and it goes bk to normal but then shortly after it breaks agen
 
Hello Guys. I have the same problem and I found out the solution. The problem is a faulty contact from the touchscreen leading to the phone board. To be short: on the right side of the phone were the volume buttons are, under the touchscreen is the screen's contact. Try "detaching the screens face a little from the phone body exactly at the volume down button(using ur fingernail or something) and see if the touchscreen is responding in anyway. My phone has a bad contact there, and in normal mode all is frozen. Now if I try to pull towards me, the touchscreen frame from the rest of the chassis, only a mm SURPRISE!! My touchscreen is working. IF this is your case too...I suggest get a screw-driver and open the chassis, and trying to make the connection permanent, somehow. I haven't done this yet, but will do it today. If anyone is interested I could post the results:) PS: you can send it back to warranty of a repair phone shop, only to force you to buy a new touchscreen and pay for the repairs, on a 99% working phone, with a faulty contact. The choice is yours:)
 
I've had the same problem, I too have had the phone for a little over a year. Usually I detach the screens face a little from the phone body exactly at the volume down button using my fingernail. This does work, but only for a short period of time. If anyone has any idea how to permanently fix this, I would greatly appreciate some feed back. :)
 
Back
Top