Samsung Dead Boot with 3rd party solutions, success/failure stories HERE !!!

  • Thread starter Thread starter Multi-COM
  • Start date Start date
Java: PCB are PCB.... before 2 weeks there was no methode for Qualcomm with ORT but PCB exisit and was amked (U700, U900) - now pelple can use...so wait until ORT will finish update for Broadcomm and one more....... ofcourse JTAG PCB can be used for other JTAGS devices that support Broadcomm

always looks for supported CPu's models on ORT - not viceversa so not fidn JTAG and then supported device.... this are same as in other filds....first find device that will support it, then cable
 
For Qualcomm you can search pinouts by yoursefl - there are datashet for CPU but you must remove it and find...in some of older phones pinouts can be foudn in service manuals.....
 
Dear Jomafi ,
Marvell Tool is really suits your needs !

- Short Description

After phone connected to JTAG and prepared for progress which mean you should also power on the phone .

1- Scan
2- Select Dump
3- Write Dump
4- Flash with original Firmware Flasher

We have softwares and dumps in our support area .




Dear etc... ,

You can always download files after you succesfully logging in .

Best Regards
www.omnia-repair.com
 
There is a Master Manual Released

Please check support area for it .

Best Regards
Omnia Repair
 
JTAG Samsung S5230 Avilla - how it work and what i need for work with him! and help s5233w with dead boot/ how repair him and what need!
 
big tks for your reply, so need wait, and sorry for my question but what is ORT ?,

Best Regards,
JAVA Good.
 
Thanks for answer!!
I will test your suggestion this evening and post result here.

B.R.
Jomafi
 
So, thats what i can say:
Download Marvell-Tool from Support
Download i900PDA-Dump from Support
Start Marvell-Tool
Press Scan - Hardware intialized ok.
Press Select Dump in Main Windows
Press write Dump
All seems good, but Omnia always stuck at initial screen.
I can't flash Firmware becaus the tool say no PDA found

Was my way to repair the phone right or wrong. Is there a Manual to use this Marvell-Tool? Is Marvell-Tool the "new" Omni-repair.exe?

Please give me an information. Thanks in advance

B.R.
Jomafi
 
help gyus i have trying to connect my omnia to the box for two days and the support is not answering
plz anyone can help with a clear photo or a video or a way to directly solder the wires to the box?
 
i managed to repair a completely dead i900 ,killed by wrong flash files .with omnia repair tool ,now the phone is stack on omnia log how do i repair this
 
bro
where i can get this product
im from indonesian usher
that product not have reseller in my country
 
Sorry Folks for Delay!

I8910 is uploaded to support area !
I will prepare others included S8300 and U900 very soon for you ..

sorry for being very busy nowadays but you can also easily figure out pinouts and connect them to Omnia Repair Tool !

In Fact you are not relying on us you have very powerful tool in hand and if you just get any pinouts you can easily connect them without relying on me .

I will prepare a some more usefull stuff about explanations , manuals , videos but it is all taking serious time so please help me to help you if you get any new document or pinouts you can also send to me at my e-mail and i can share with all our users ..


support e-mail for questions and problems : [email protected]

Best Regards
www.omnia-repair.com
 
i have just oredered omnia repar tool from multi-com, i have 3 completely dead i8910HD phones. all said "need jtag buffering" before some idiot took out battery.

Will ORT capable of Repairing these phone to life again. I also orderd multi-com solderless JTAG for same phone
 
Here is another S8300

Beside -

Multi-Com Made some JIGS for us you can check their store for new JIGS
We will have NEW JIGS after new year in our store

Thanks to friends for Help


PS : Send me Pictures as it is in example for drawing pinouts for you ! to above e-mail in my post


Best Regards
www.omnia-repair.com
 
Back
Top