K
karlleeto
Guest
Hello, I Try To Unlock S66 V54 With Tp Using SSt Crack And Furious Gold, But When I Connect Tp To Groud And Press Power Button Nothing Happen. Please Help Me How To Unlock This With/without Tp.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
D
dagos
Guest
...unlocking whit testpoint is the last solution. Because you have the highter firmware version in your phone, try to unlock using the Java midlet.
You need to use :
-papuautils 1.1.1b or c software
-service cable like serial DCA500; serial C55 cable or modifyed USB to serial DCA510 cable
-normal data cable (to transfer midlet in phone)
-phone manager software (like SiMoCo, MobilEdit...)
Steps:
Connect DATA CABLE to phone & run x65PapuaUtils
Select Com..
Connect with software .
Power on phone (without SIM) & click on SimSim (Simulate Sim).
After some seconds phone will be on his menu . .(if not click again on simsim).
Close Papuautils and open Phone Manager software (SiMoCo)
Copy Viper.jar (or bsReader) in your phone, on Data\Java\jam\Applications
Run Viper (or bsReader) in your phone
Confirm local conexion 'By Session'.
Confirm acess aplication java to data cable.
Wait few seconds (or minutes).
Wait for a 'beep' and the IMEI/ESN/HASH should in phone
-dont touch nothing and start x65PapuaUtils and click button 'PX65V4' - program starts receiving imei/esn/hash from java aplication.
- Click "Calculate Skey and Bkey' and wait SKEY and BKEY to be calculated
-USE UNLOCK CABLE (SERVICE CABLE)
- GO 'ServiceMode'.
- click'Enter Skey to phone'.
- Cick'Freia.log'. dont save the log, CANCEL. after that the prog ask if you want write blocks directly to phone. click Yes.
- Program write the blocks.
now all keys are saved and should appear 'FactoryMode' on the papua right window.
Note: if you use the DCA510 cable, not needed to switch between data and service cable. This cable have this functions.
dagos
You need to use :
-papuautils 1.1.1b or c software
-service cable like serial DCA500; serial C55 cable or modifyed USB to serial DCA510 cable
-normal data cable (to transfer midlet in phone)
-phone manager software (like SiMoCo, MobilEdit...)
Steps:
Connect DATA CABLE to phone & run x65PapuaUtils
Select Com..
Connect with software .
Power on phone (without SIM) & click on SimSim (Simulate Sim).
After some seconds phone will be on his menu . .(if not click again on simsim).
Close Papuautils and open Phone Manager software (SiMoCo)
Copy Viper.jar (or bsReader) in your phone, on Data\Java\jam\Applications
Run Viper (or bsReader) in your phone
Confirm local conexion 'By Session'.
Confirm acess aplication java to data cable.
Wait few seconds (or minutes).
Wait for a 'beep' and the IMEI/ESN/HASH should in phone
-dont touch nothing and start x65PapuaUtils and click button 'PX65V4' - program starts receiving imei/esn/hash from java aplication.
- Click "Calculate Skey and Bkey' and wait SKEY and BKEY to be calculated
-USE UNLOCK CABLE (SERVICE CABLE)
- GO 'ServiceMode'.
- click'Enter Skey to phone'.
- Cick'Freia.log'. dont save the log, CANCEL. after that the prog ask if you want write blocks directly to phone. click Yes.
- Program write the blocks.
now all keys are saved and should appear 'FactoryMode' on the papua right window.
Note: if you use the DCA510 cable, not needed to switch between data and service cable. This cable have this functions.
dagos
K
karlleeto
Guest
Can You Provide Me With Link To Papuautil And Java Midlet App.
D
dagos
Guest
...see in my attachemments from:
http://forum.gsmhosting.com/vbb/showthread.php?t=679553
http://forum.gsmhosting.com/vbb/showthread.php?t=333872
dagos
http://forum.gsmhosting.com/vbb/showthread.php?t=679553
http://forum.gsmhosting.com/vbb/showthread.php?t=333872
dagos