S65 V43 dead, need siemens expert

  • Thread starter Thread starter abdelrx
  • Start date Start date
As i have say(write) to you before "think before doing any thing,ask your self and this time why you can connect your with Papuas and you can't with Vklay?" I will respond to you have you try to connect your phone to Vklay via test point? Have you try an other bootloader in the choice menu as SL65 ?
Your phone isn't dead, remember you can retreive all info with papua...
Salam
 
Dude just read.....

1. Connect phone with papua in SERVICE MODE (custommer)...(you already have SKEY, else make testpoint)

Don't close papua tools....so

THEN

2. Open EEPROM tools and write eeprom backup (that youve made before unlocking)
 
I'm wondred why you have unpluged the cable in the moment when the soft write to the phone
Salam
 
hi there,
Buy martech box II, is the most professional siemens machine ,
with that you will always solve that kind of prblems
regards pewy2000
 
with martech same problem :
ERROR (49.02)
[ERASE_FLASH_02](5B)
At address: 00020000
it is so strong!!!
 
i have try to connect the phone with and without testpoint (z-diode), the problem is the same.


i have not try
 
open xpapua go to codes connect phone in service mode try to recalculate than unlock skey then enter skey or try the open all boutton .
after go to flasher 1072 clic connect then shotrly pwr on if connect ok flash fone if not select open all in tab selection it will be ok to flash if not searsh in my posts good luck
 
for Flasher 1072 , after enter Skey in phone, u need create ini file with x65flasher.ini

same method for V_Klay

and you need good Flash files
 
i have same problem.i make second picture test point now dont flash martech dont connected.x65 flasher error, vklay error, sst crack dont see
 
I have one s65 (v43), who power down every time when i press "power on" button and after confirmation "OK", the phone break down.

I flashed the phone with swup (v43) and again the same problem. After that, i flashed phone with SST (full flash witch i downloaded from net), and the phone is now DEAD.

I flashed with few version of swups but still is dead. The phone can't power up.

EXPERTS, need help!!!!!!
 
i did some test using a working c65 for now if the problem came by computer or v_klay or cable, ram ic...

first i tryed to read flash using c65 (password boot), communication is OK, programme start reading, all is OK. I also try with generated bootloader by papua X65 3547xxxxxxxxxxxx, it is also work.
 
With Papuasoft make bootloader (7Ko) and put the file generated in "V_KLay\data\Loaders" ; Write full flash Vklay-->Option--->Advanced---> tick on the last choice (enable writing in bootcores of phones)
Salam
 
before making bootloader i have : No answer from boot chaouskey2.bin
now i have : chaoskey2.bin...ok > trying to set communication speed...Ok > A hardware I/O error was reported while accessing COM1 - loder : Autorization#1 : Loader not ready.

I use Vklay 3.3 with s65 (Password boot)
 
in seconde time i retry with my dead S65 using s65 (password boot) and genrated bootloader by papua ; the problem is the same : in few seconde i obten error loader not ready
 
Back
Top