S65 V43 dead, need siemens expert

  • Thread starter Thread starter abdelrx
  • Start date Start date
A

abdelrx

Guest
HI,

my S65 is dead beaucause i disconected the cable when eepromtool start writing.
Now the phone dont power one, only a beep.
i have a good eeprom backup but i dont know how to write it

i already try with

-eeprom tool = sending service boot but the phone beep and nothink
-v_klay = error chaouskey2.bin
-sst crcked = entering service mode and nothink
-paupouas = i can do alll the procedure for unlock, all work

Can you help me to rebuild the eeprom area, wich softwre to use, test point or not, is it permanantly dead?


your help will be realy apreciat, thx for all.

AZIRA
 
Ok! it's the first stape.
But i can't do this first stape >>> boot not loaded

I think maybe i am wrong in testpoint?!

Wich testpoint to use and at what time

thanks for all your reply, you help me so much!
 
Use this solution...

1. Connect phone with papua in service mode (custommer)...(you already have SKEY, else make testpoint)
2. Open EEPROM tools and write eeprom backup (that youve made before unlocking)
3. You get some errors that it can't write certain eeprom blocks....just ignore it and resume eeprom writing.
4. After that phone is still dead, but battery settings are repaired then....
5. So in papua tools you can connect again and use the Recalculate Keys in Flash....
6. Phone is alive again
 
thx for your reply thagansta but the phone dont conect with eeprom tool (beep).

with papua i obten this :

Checking values SKey from page "CODES" ...
Using Skey: 89560968
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0089,880D
SIEMENS S65 353912003529053
HASH: 236C4C2F6F5C5BDD173EBDBCB58FD832
OTP ESN: 472DE247
OTP IMEI: 353912003529053
All EEP blocks: 231
Block 52,76,5008,5009,5077,5121,5122,5123 found .
Old block 5008 saved into 353912003529053_EEP_051021000028_5008
Block5008 not need replace !
Old block 5077 saved into 353912003529053_EEP_051021000028_5077
Block5077 not need replace !
Old block 5121 saved into 353912003529053_EEP_051021000028_5121
Error code asknowledge command erase segment A022C459!
No ask. tocommand writting segment A022C459!
Impossible replace block 5121!
Replace not good- check phone !

what can i do for rewrite eeprom???
 
whith this soft a obten this error : The program failed to read boot password. The procedure exited with error message: No answer from BFC ping
 
With Winswup flash starting but in few secondes a obten : Erase-Error Block 0 : Error in the command sequence

What can i do
 
no idea about this problem???
the phone was dead beacause i have disconected the cable when eeprom tool started writing.
Can martech solve my problem?
 
with this testpoint i cant conect phone in service mode with papua
result in boot not loaded like you can see in previous screen shot
 
if you had read codes before you don't need to do it 2nd time calc skey and the fone will boot without test point if not you must read the codes minimum 1 time
ok if it's done ask someone for fullflash s65 v12 flash because i have slow connection i can't upload it here.
don't forget to create ini for x65flasher or vklay boot for your fone and put it in the aproprate folder than flash it .after youcan unlock with sst.
 
my problem is not solved
i am waiting for HELP
i have not experience in flashing siemens
i think in this forum some peaple have good experience in siemens phone
thanx in advance for all answers
 
look man there's a full solution to repair this kind of mobiles just tey search botton
 
What's the matter with you think before doing any thing, ask your self why you have created and placed the bootloader generated by papua in "V_KLay\data\Loaders" ...
Open good your eyes and in vklay -->menu choice of boot choose the bootloader that you have placed in "V_KLay\data\Loaders"
Salam
 
you are right the fone boot without testpoint
I have this file

i create a vklay boot using VKD V3.2+ by papua (i have Vklay 3.3) and i put it in the apropriat folder, now chaoskey2.bin OK but have an other error : A hardware I/O error ... Loader not ready
I will retry all the night again...
 
I use Vklay 3.3 with s65 (Password boot)
no select the x65 xxxxxxxxxxxxxxxxxx (xxxx is the imei of fone)
 
i did the same procedure with x65flasher, i tryed to flash fone with s65_v12_ff.bin
in few seconde i obten > Flash erase error
 
for v_klay v3.0x the bootloader generated with papua named x65_353912003522413 but i use v_klay v3.3 and for v_klay v3.2+ the bootloader named x65. i have tryed with the 2 generated loader but the problem is the same > loader not ready

May be it is a problem with my computer?!

I dont think so because for resum :
with martech > ERROR (49.02)
[ERASE_FLASH_02](5B)
At address: 00020000

with x65flasher > flash erase error

entering service mode with papua > boot not loadedIs it dead for ever?!
 
Back
Top