Repair solution for S/ME45 battery problem

  • Thread starter Thread starter ppl
  • Start date Start date
P

ppl

Guest
Use sensortool 1.1 by DarkBear-Thank you man

In cell 0000 insert 3940
0002 insert 4200
0004 insert 63340
0006 insert 999
0008 insert 79
000A insert 62444
000C insert 107
000E insert 65137
0010 insert 100
and in 0012 insert 0

Tested 100% by me and work perfect

P.S. Here is the battery status with this solution:

Fully charged (100%) 4,17v
Discharged (0%) 3,54v
 
I`ll try this solution in 3 pieces S45 and 5 pieces ME45 and all phone work perfect - this is standart factury values for S45 but also work fine for ME45 diference between S & ME is too small - 50mAh in original battery and no have need to change))

P.S. - Tankist Seryoja nadevai shlemofon
 
Two WEEKS? - One day,just one day
If this procedure spend me two weeks - I`will go to make suicide
Sorry for little joke about T34
 
@legija and @others
it is not full service mode!
you can't use service software for tuning the phone (winsui) with closed bfb bus !(you can't do tuning as in nokia phone without special things )
initmap -it is sw for eelite area!
 
winsui -it is service sw for siemens mobile phones!(x35 and up)
we can make some test and tuning ( but for it we need in unlocked bfb bus)
it is hardlock protected(as initmap)




(bfb bus is closed)




(bfb bus is open)
 
You may download it here:
http://groups.yahoo.com/group/drug_store/
(must be registered in Yahoo!)

To connect it:

1- Shutdown the mobile, plug the cable.
2- Before open the program a second or 2, start pressing On (in mobile phone) until it enters into "Service Mode".

Always worked for me...
 
Hmmm!!! That is the reason not working indicators on x45 in service mode

Now we need to find that part of flash & kill that check, or write "security string" generator 8)
 
Hi when i upgrade my s45 to s45i my batery live no longer tnan 1 day(before 2-3 days)can i use this values on s45i
 
you can't do FULL service mode on x45 series!!!!!!!!!
you need open BFB bus for it ! it can do in authorized service center only!
 
it is not simply!(problem not in winsui , problem in bfb status!)
but ........... if one man made, other man can unmake!
 
Back
Top