Repair ALL SX1 here

  • Thread starter Thread starter fastlink Jogja
  • Start date Start date
Dear Sticky ,
Really You Cant Help Me ?
I Have So Problem Without Use My Mobile.
Please Help Me If You Can.
Because I Am Not Conscious In Mobile Program.
My Moile Is Siemense Sx1.and I Need Its Unlock Code.
Iemi Is 352079003149422.
Thankyou So Much.
 
need help how to unlock SX1 fon lock

i jus hav sst crack is it can use

pls teach me step by step
 
funny
First, SX1 not is the X65 phone.
What to you need? To flash or to patch (you use v-klay software)???
For flashing, if you have bin file, use Joker.
dagos
 
im desperd to sx 1...
here i have one sx1....firstime come to me in dead condition...i try pres joystick an push the power button...the phone can enter to swap mode...

so i swap the phone whit winswap 32 Egold/k1, version 3.05

after that...if i pres the power button the phone start up but only until siemens mobile...i flash again whit my martech, i put the last version flah file
i do repair imei and than unlock....
now it live again .....
pres the power button.....it show siemens mobile and then contac retailer ( 07 )
 
nice soliution but i don't have any S-Gold phone in hand & i think that my problem is the symbian part so is there any other sugestions ?

i need wuick help please

BR,

Kiriazy
 
write full flash(8m) first,i repair 3 in this way,after taht *#pw ,8m flash must be the same sw vs,i write`it with martech
good lock!
regards
 
hello, my SX1 is dead. it was working well and some days back it suddenly hanged itself and i removed battery again put and press button on it shows some blue lines or sometime dont show any anything on screen and turns off not booting at all and not starting in winswup mode.battery i used is charged full cuz i have desktop charger. i gave it to some hardware and he said it has MMI problem and its not available.please tell me what i can do.i desperately need to use my SX1 again.
 
the problem was on the cpu...
i reballing the cpu....and using usualy winswap...
now its work prefectly...
 
Hi, BB-gsm

Please check this and tell me your idea :http://forum.gsmhosting.com/vbb/showthread.php?p=1722195#post1722195
 
Hi,
for SX1 full flash go to:
http://gsm-multifund.de/board/downloads.php?do=file&id=283
(E-Gold part; need to register)
http://eh.student.utwente.nl/~landy/index.php?dir=Repair_FuBu/
(E-Gold part)
user: mobile
pass: elibom
http://www.siemens-club.ru/soft-ff.php
http://gsmsimlocking.com/Gsm/index.php?dir=Joker_UnOfficial_Support/SX1/
(all files)
user : gsmsimlocking
pass : freefornow

Br,
dagos
 
Ok boys here is a tough problem
I came across V_klay and it seemed to me it can flash the OMAP symbian sofware in the sx1 using prolific cable as my usb cable is not detected anymore by my PC. So I used V_klay and unfortunately I overwrote the BOOTCORE section with garbage

So now my RED POWER button will not turn the phone flashing option on since the bootcore is gone

I go to joker and by pressing the red button will not wake the phone up

IS THERE ANY WAY to load the BOOTCORE???
 
Back
Top