Repair all CF62 here

  • Thread starter Thread starter .::Mystic::.
  • Start date Start date
M

.::Mystic::.

Guest
This tutorial helps to repair software problems like Dead phone,Wrong software,Buzzing etc...

Tools needed:-V-Klay,SST/Joker (Joker is recommended) and Another fully working CF62 (For method four)

------------------------------------------------------------------------
Method One
------------------------------------------------------------------------Download This File (Contains 3 flashes for Siemens CF62)Inside the RAR open SIEMENS CF62 LG95 V83 - 00200000_full flash.rar andextract itWrite it using V-KlayUse joker and Recalc all Keys Using OTP IMEI (The OTP IMEI box should be ticked)If phone has white screen set contrast using Joker/SST.If phone is Dead Lets go to Method Two
------------------------------------------------------------------------
Method Two
------------------------------------------------------------------------You need the to download the file in method oneInside the RAR open cf62_v21.lg03_fullflash.rar andextract itOpen Joker and Full Flash the phone using the V21 LG03 flashRecalc All Keys using OTP IMEIYou need to set contrast if you have a white screen using Joker/SSTIf phone is still dead then lets go to Method three
------------------------------------------------------------------------
Method Three
------------------------------------------------------------------------You need the to download the file in method oneInside the RAR open Cf62_V07_lg4_fullflash.rar andextract itOpen Joker and Full Flash the phone using the V07 LG04 flashRecalc all keys using OTP IMEIIf you have white screen then set contrast using Joker/SSTIf the above three methods dont work there is one last method
------------------------------------------------------------------------
Method four
------------------------------------------------------------------------Backup the FullFlash of a fully working CF62Write it to the Dead CF62 with Protect Bcore box uncheckedRecalc all Keys using OTP IMEISet contrast using Joker/SST if you have a white screen.
 
Press simulate Sim at joker and you can set LG to default (*#0000# or *#0001#)

But it is bad cut problem!


Repair tutorials are many in the forum just use the search button
 
yes Simulate Sim Workout and i have changed its language to Eng.
But its a bad Cut................
Asking for the Sim with sim inside.
Now its h/w which is almost impossible for me.
thanks to all friends who showed their Concern.
@ Hacktek thanks Brother ur File Powerup my Phone.
@.::Mystic::.
Brother Plz Upload a Full Flash with English Language pack so i can get rid of simulating every sim in future.
BR.
 
is there any known solution for cf62 that has very low battery life, turns off alone sometimes and the outer lcd shuts off with the phone on?
thanks
 
Download Link Expired.
Plz Upload it on ur own Page.
and anylink for vkley soft?
bcoz i have read somewhere under ur post that i can revive dead CF62 with vkley
BR.
 
Use search button for V-Klay.
Fullflash link works, you just need to w8 like rapidshare.
After flashing press Recalc All Keys in joker!
Tell me the results.
You may need to set contrast like i said
 
don`t try all this just flash yr phone by Fullflash with feria10
chose M55
i just try it now cause all this is not helpfull
i flash phone with v-kaley not working
i flash it with joker not working i flash it by SST not working too
just feria10 ,chose M55 and write any FF
Good luck
Regards
 
For V-Klay, you can download it from the Official V-Klay's Page:
Or, U can go at my home page, the download section. There U'll find a link to my FTP server. U can download also a 100% tested & working CF62 full flash maded with Joker, to be used with method 4.
At my FTP server U will need username & password, so here it is:
user:forum
password:gsmhosting.com
 
thanks bro.
But as u can see My Phone is already alive with Joker.
u can say Joker is my beloved soft for E-Gold Phones.
But now Problem is not dead or alive Now its Just for English LP.
Plz Upload a FF if u have which contains Eng LP.
BR.
 
Don't ask for another flash file.. U have all that U want: Just "SimulateSim" with Joker, go into MENU, set the default language to English, and read FullFlash again with Joker! You will have a working FullFlash with the default language English!
And for the bad-cut, I attached here the bad-cut repair, but it is a little bit hard to desolder the processor, put two or three wires, and than resolder the processor!
If U want, U can send the PCB to me, I will repair that Insert Sim for U, but U will pay the costs of delivery!
P.S.: Forget Freia, Joker is the best!
 
Yes Brother link is okay Now.
thanks
But when i try to Flash with Vkley 3.3
it shows me this Warning is it Normal?

BR.
 
After Flashing With Vkley here Recalc Log
Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS CF62 lg95 Sw83
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 6601B898 -> PhoneID: 98B80166
OTP IMEI: 356819006052800
HASH: F9CC59A8B770FEAC733D86067DFFBA52
Use OTP IMEI: 356819006052800
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\CF62lg95Sw83_EEPROM_060819102557.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

Light On...
No Ping mobile
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 0362 08 0000
********************************************

Herez Joker
Use file FullFlash (offset block in file = 0x800000).
FullFlash file info:
FlashID: 0001/2212
SIEMENS CF62 Sw07 lg4
RealLgPack: lg4
Start...
Loading BootsModel(CF62)...
Error: Load StartBoot answer code 0x50!
Open file "D:\UNLOCKING\i-ztnawhcs\DISK1\ALL ABOUT SEIMENS\Joker\Joker Flash Files\CF62 By Mystic\cf62\Cf62_V07_lg4_fullflash.bin" for write in Flash.
Use file FullFlash (offset block in file = 0x800000).
FullFlash file info:
FlashID: 0001/2212
SIEMENS CF62 Sw07 lg4
RealLgPack: lg4
Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS CF62 lg95 Sw83
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 6601B898 -> PhoneID: 98B80166
OTP IMEI: 356819006052800
HASH: F9CC59A8B770FEAC733D86067DFFBA52
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\CF62lg95Sw83_Backup060819103504.eep" file.
Restore EEP0067 - Ok.
Restore EEP5005 - Ok.
Restore EEP5007 - Ok.
Restore EEP5012 - Ok.
Restore EEP5093 - Ok.
Data file "D:\UNLOCKING\i-ztnawhcs\DISK1\ALL ABOUT SEIMENS\Joker\Joker Flash Files\CF62 By Mystic\cf62\Cf62_V07_lg4_fullflash.bin".
Write Flash addr: 0x800000 size: 0x800000 - Ok.
Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS CF62 lg4 Sw07
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 6601B898 -> PhoneID: 98B80166
OTP IMEI: 356819006052800
HASH: D003FAFF5579EBEE48DAE8317FCE96A9
Use OTP IMEI: 356819006052800
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x010000...
BCORE backup in ".\Backup\CF62lg4Sw07_BCORE_060819105026.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\CF62lg4Sw07_EEPROM_060819105050.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
But Phone is Still Dead Can't Power UP.?
what Now?
Best Regards.
 
i beleave that joker is gr8 software i like it so much but in this phone this is so stranger i flash the same flash by joker phone didn`t work and when i flash it with feria it is working and u get yr solution it is hardware problem as hacktek saied
Good Luck
Regards
 
Don't use V-klay, Use Joker 0.3.4.3., and don't check "Protect Bootcore", so you can overwrite the bootcore! Use the CF62 full flash from my FTP !
U will find here the password, username and FTP address!
After fullflash, U must ReCalc All Keys, and all will be OK! Finally, U must set the contrast with Contrast Tool in Joker, or other program.
Joker must look like this:
 
Back
Top