Repair ALL A70 here

[fedo500]

really goooooooooooooooood work

 

[faith_18]

Before: Siemens A70 Dead Phone

Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS A70 lg98 Sw13
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: 5E7EADE1 -> PhoneID: E1AD7E5E
OTP IMEI: 356342005461294
HASH: E4D9C8BBF8DA0BFA3DB92C64B2675670
Use OTP IMEI: 356342005461294
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xBC0000 size: 0x030000...
EEPROM backup in ".\Backup\A70lg98Sw13_EEPROM_071207195640.bin" file.
Write EEPROM addr: 0xBC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

After Flash with: A70_8Mb_220Cv14FF

Open file "C:\Documents and Settings\Administrator\Desktop\All Folder\Main Software\Joker_V_0355\Evil-Hackers\A70_8Mb_220C_v14_FF.bin" for write in Flash.
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.

 

[kades]

What that kind of error...

Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com2 460800 BAUD: Ok.
SIEMENS A70 lg98 Sw14
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
EEPROM segments not found!
FSN: C5B47A56 -> PhoneID: 567AB4C5
OTP IMEI: 356469003247449
HASH: 2276D36132FD0B84E553F839D211F85E
Use OTP IMEI: 356469003247449
Error: Not valid addres EELITE in set phone model!

 

[sajib_ngage]

cheak tp cearfully.....................................

 

[damabib]

bb-gsm thx and u are legacy.nice and good of u

 

[KelvinShadow]

Yeah, it was hard to do cause it wouldn't work..

But thanks, for your advice!

Got it back working!

Thanks a lot!

Regards,

Kelvin

 

[f164]

bad tp or hardware problem try to rehot the flash ic then do it again

 

[tutu1982]

hello i have a siemens A70 That's problem are when i on the mobile mobile was all ok but sometimes when i on the mobile mobile says" battery empty please recharge" continue what's the solution plzzzzzzzzzzzz.

 

[faith_18]

The is back to normal, Siemens A70 have power now.

The problem is the display is very dark?

When I change contrast it's ok, but when i turn it on,

the display is very dark?

Can someone tell me what is the solution?

tia

 

[nik789]

good work keep it up

 

[All_mobiles]

@BB-gsm
I tried as u said
but the phone still dead
is the phone problem hardware?

 

[piracik]

files uploaded at www.gsmserver.pl free

 

[Mapamann]

Hi...

i get the following error while i try to flash a A70 with the files from the first post:


Open file "D:\Dokumente und Einstellungen\Mapamann\Desktop\A70_4MB_221D_FF.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/221D
SIEMENS A70 Sw32 lg91
RealLgPack: lg91
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A70 lg98 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: D2E94BC2 -> PhoneID: C24BE9D2
OTP IMEI: 356468003321147
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ClearFlashSeg at 0x810000 does not answer!


what can i do??

 

[mutanda]

I flashed phone using a bigger flash file now the phone fails to send boot loader.
Get someone help me with a solution please ?

 

[piracik]

SW mismatch

Use this sw http://www.gsmserver.pl/modules.php?name=Downloads&d_op=getit&lid=274 - avaible after free registration



oh and contrast - after setting good contrast use 5007 Write (Sevice Mode)

 

[Franchute]

Very nice ty