Repair ALL A65 here ... ;-)

  • Thread starter Thread starter Andreika
  • Start date Start date
No. I bought the phone new. repaired with sst as well so no problem with imei. not a bad cut, cos network found and i tested on several networks after I unlocked. then I flashed and problems started.
If i search for network manually it says "at present not possible!"
AMD chip, flashed with AMD FUBU, repaired with SST, unlocked with freia. Turns on ok, goes to "network search"

This is NOT a bad cut as tested corrently after unlock.
 
@ DonJuanS

Yes I know, and you must know it also, (use SEARCH button !)

If u can`t find it, tell
 
i have downloaded flashfiles A65_AMD_RepairFF_1 from 1st post , it's asking password when i try to extract the file. 2nd i have ufs-3 tornado..can i flash siemens phone through joker egold with ufs-3 ???

BeSt ReGarDz,
 
hello buddies i m new user of joker egold i want flash the sets of siemens where i get flash files of siemens plz guide me i search the forum but i can't understand coz its in russian language plz tell me where i can download a flashfiles of siemens sets thanx
y2k
 
@bb, pls which site can 1 download up to date flashfiles for all siemens model
thanks
 
plz plz plz please how will u see that this phone is intel or amd
thanks very much
 
Buzzzz and blue screen.

1= flashed with Intel flash.
2= SST saying Repaired
3 = Freia Saying no boot at the 3rd boot line.

Any Idea?

May be boot area corrupted.

Thanks
 
what software do you need freia?
if is freia you can download it from http://www.melodiasmoviles.com/trucos-moviles/manuales-liberar/liberar_siemensa652185.php
if you need please send me a email and i can send it to you .
if you deed other advice about siemens tell me
bye goodluck
 
after flashing a65 amd with sst, (flash file from 1st page in this tpoic) phone is ok, but when searching for network its been restarted. i try to update with winswup version 07. but now no network. whats the prablem? any solution?
by the way, same prablem in this topic. http://forum.gsmhosting.com/vbb/showpost.php?p=1412789&postcount=108
 
@ UFSx-3

Re-read first post then! There is written to flash with SST ! also possible with Joker V0.2.9.5 !

@ Haji Bros

You also read first post !!!
 
plz help me.. i hav a fone that is dead and beeps wen power switch turned on... here is the log
Start...
Loading BootsModel(A65)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
Warning: HASH data error!
SIEMENS A65 lg98 Sw10
Soft FlashID: 0089/8856
FlashID: 0089/8856
Flash Size: 16Mb
Region(1): Blocks 255, Size 64Kb
Region(2): Blocks 8, Size 8Kb
EEPROM segments not found!
FSN: C5DCE1A6 -> PhoneID: A6E1DCC5
OTP IMEI: 354494002342845
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Calc Skey Error: HASH data error!
No open Com1 Baud Rate 115200!
Start...
Loading BootsModel(M55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
Warning: HASH data error!
SIEMENS A65 lg98 Sw10
Soft FlashID: 0089/8856
FlashID: 0089/8856
Flash Size: 16Mb
Region(1): Blocks 255, Size 64Kb
Region(2): Blocks 8, Size 8Kb
Start EEPROM segments at addres 0x7C0000
Warning: Not valid addres Start EEPROM in set phone model!
FSN: C5DCE1A6 -> PhoneID: A6E1DCC5
OTP IMEI: 354494002342845
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Calc Skey Error: HASH data error!
Start...
Loading BootsModel(M55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
Warning: HASH data error!
SIEMENS A65 lg98 Sw10
Soft FlashID: 0089/8856
FlashID: 0089/8856
Flash Size: 16Mb
Region(1): Blocks 255, Size 64Kb
Region(2): Blocks 8, Size 8Kb
Start EEPROM segments at addres 0x7C0000
Warning: Not valid addres Start EEPROM in set phone model!
FSN: C5DCE1A6 -> PhoneID: A6E1DCC5
OTP IMEI: 354494002342845
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Error: EEP0067 not found!
Error: EEP0076 not found!
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\A65lg98Sw10_Backup080401193115.eep" file.
10 factory EEP blocks are read out and are saved.
.. fone enters in the service mode.. i hav tried flashing it says that
]
Open file "C:\Documents and Settings\peter\Desktop\advance bb5 box\A65_00-100_FF.bin" for write in Flash.
FullFlash file info:
FlashID: 0089/8856
SIEMENS A65 Sw15 lg1
RealLgPack:
 
It must be Intel, not AMD

I added new flashfile regarding no network, check first post !

As for corrupt language pack, you can use following and write this lang pack apart, with SST or just SWUP the phone !


Regards,
B
 
Joker 3.4.3 can NOT flash A65 !
Use SST or Joker 3.4.1 (maybe it will need different speeds) for flashing it !



Regards,
B
 
Back
Top