in short it would be a project. You would need an EX as a donor. but it goes far beyond just changing the window regulators and door lock. The windows and locks are powered by relays that are in the underhood fuse and relay box. If you don't have them on the car now, then the chances are the harness doesn't have the wiring and connectors for the relays nor for the door switches you would need to install. So you would need the harness connectors from the donor and possibly the wiring harness as well so that you can install the switches and wire in the relays for the locks and windows. You will also need a very good wiring diagram if you want to do the relays separate from the original configuration.
it can be done if you've got the time but it will take a lot of time and diligence once you get all of the parts that go inside the doors and the switches, relays and electrical connectors.
How hard would it be, if I had the right donor car, to put power windows in a 1993 honda civic dx that has manual windows and door locks? Which model would i need for the donor car? An LX or an EX maybe?
in short it would be a project. You would need an EX as a donor. but it goes far beyond just changing the window regulators and door lock. The windows and locks are powered by relays that are in the underhood fuse and relay box. If you don't have them on the car now, then the chances are the harness doesn't have the wiring and connectors for the relays nor for the door switches you would need to install. So you would need the harness connectors from the donor and possibly the wiring harness as well so that you can install the switches and wire in the relays for the locks and windows. You will also need a very good wiring diagram if you want to do the relays separate from the original configuration.
it can be done if you've got the time but it will take a lot of time and diligence once you get all of the parts that go inside the doors and the switches, relays and electrical connectors.
in short it would be a project. You would need an EX as a donor. but it goes far beyond just changing the window regulators and door lock. The windows and locks are powered by relays that are in the underhood fuse and relay box. If you don't have them on the car now, then the chances are the harness doesn't have the wiring and connectors for the relays nor for the door switches you would need to install. So you would need the harness connectors from the donor and possibly the wiring harness as well so that you can install the switches and wire in the relays for the locks and windows. You will also need a very good wiring diagram if you want to do the relays separate from the original configuration.
it can be done if you've got the time but it will take a lot of time and diligence once you get all of the parts that go inside the doors and the switches, relays and electrical connectors.
in short it would be a project. You would need an EX as a donor. but it goes far beyond just changing the window regulators and door lock. The windows and locks are powered by relays that are in the underhood fuse and relay box. If you don't have them on the car now, then the chances are the harness doesn't have the wiring and connectors for the relays nor for the door switches you would need to install. So you would need the harness connectors from the donor and possibly the wiring harness as well so that you can install the switches and wire in the relays for the locks and windows. You will also need a very good wiring diagram if you want to do the relays separate from the original configuration.
it can be done if you've got the time but it will take a lot of time and diligence once you get all of the parts that go inside the doors and the switches, relays and electrical connectors.
in short it would be a project. You would need an EX as a donor. but it goes far beyond just changing the window regulators and door lock. The windows and locks are powered by relays that are in the underhood fuse and relay box. If you don't have them on the car now, then the chances are the harness doesn't have the wiring and connectors for the relays nor for the door switches you would need to install. So you would need the harness connectors from the donor and possibly the wiring harness as well so that you can install the switches and wire in the relays for the locks and windows. You will also need a very good wiring diagram if you want to do the relays separate from the original configuration.
it can be done if you've got the time but it will take a lot of time and diligence once you get all of the parts that go inside the doors and the switches, relays and electrical connectors.
