>>> Post all BB successfully unlocked with MFI <<<

unlock bb 8700 successful, but no imei turn into imei 004401132725249 change imei use radio lab toll so at write imei out Radio eror: access ID eror code=1 Fail cannot access Id cannot write imei

note article: (make telephone same sms tx rx ok all)
 
was the 8900 unlocked already? or how did you do it?

can you post your configuration file? i tried everything to unlock the 8900 using MML and cfp command lines with no luck, i always got the RTAS error and that MEP file was not found when i used the default MEP-04103-001, im beginning to think that it uses another version of the MEP but i have too many of them to like try them 1 by 1

just so i wont go offtopic, i successfully unlocked an 8320 from tmobile and successfully branded it to a blackberry engineering version
 
linhplayer,
can you please share with us your experience with 8900? I tried but without success, at the end i recieve an error: time out to connect...etc.
thanks in advance
 
same to me, i tried several time to unlock my 8100 pro (Tmobile UK) with MFI but no luck (tried on two different computer as well) MFI loader shows fail message when tries to reconnect the handset and shows COM error. now my handset comeup with white screen with "no application (factory OS)" message. I followed all steps as mentioned by RAMJAN

please help.
 
Im having same problem with 9000. I installed mmlsetup, copied MML files to C:\MML and overwrote files. I also installed NET Framework. Now when i open MFI, tick on "autostart" and connect phone, nothing happens.
Help!!
 
Hi RAMJAN, pease help

i tries to unlock BB 8100 pro usi MFI but getting error in te middle with following message.
"Unable to cast COM object of type 'RIMRADIOCOMLib.RIMRadioObjClass' to interface type 'RIMRADIOCOMLib.IConnection'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FE9513A0-9002-11DD-BAEA-0002A5D5C51B}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."

BB is now turns to white screen with message "NO APPLICATION LINKED (FACTORY OS)"
 
plz can any one give me the solution very urgently? i have 8900 curve brand new and i need to unlock .when i erase it using MFL loader.after erasing successfully it says FAIL in red and then my pc continuously says USB DEVICE ERROR NOT CONNECTED
as soon as i put battery.ive tried erasing by USING AND NOT USING the battery.but in both the cases aftersuccesfull erasing it says FAILED IN RED and my PC says USB DEVICE ERROR NOT CONNECTED.can any one help me out please with this problem.


wbr
 
ATT 8100 successfully unlocked using MFI Loader 2.0.1.3. It took sometime to get everything d/led but once I was up and running and had everything in the right spot it was hassle free. Looking into doing Curve and TMO 8100.
 
Back
Top