New.CF62 Testpoint for cutting!!!

  • Thread starter Thread starter evan_silbert
  • Start date Start date
On first picture, targeted with red circle, i see cutted line, so, are you all blind?
 
@All those with INSERT SIM

Have you made the testpoint or are you just saying it because this is a thread about CF62? V7 does not need testpoint so I don't suspect those with the problem and this version are using the testpoint.

Please tell us so we know what is causing this problem.
If you are using the testpoint, you must also be cutting the line from the sim reader somehow...
 
After cutting tp i get update not accepted and phone now wrong software, pls what should i do guys....?
 
i find that cutting testpoint further to the right you stand less a chance to damage sim reader. closer to the little silver dot...

please use at your own risk...

i'm just posting my experience.... none damaged after the first two some of them i do kind of deep no bad luck yet.
 
....and let me what is giong on.
cheers http://forum.gsmhosting.com/vbb/showthread.php?t=168852
 
Mr_GsmVIP,

Which Friea version did you used and what phone type to unlock the phone, I have most of the friea versions from 9 to 15. Also there is a Friea CF62 patch version by Seba!GSM do you think this will also unlock the phone after one cuts the testpoint?

BR
E.C.
 
Strange... the real question is whether or not the phone is booting as if t9 is gone when the TP is cut. If not, this is a hoax and you are cutting the wrong TP.

If it is booting as if it is TPed then you are also cutting a line for the sim, I believe.
 
i have 2 cf62t t-mobile v84 that says insert sim after cutting tp. i know that i cut the correct tp.
 
Good news
i killed the phone by this solution !!!!!!!!!!!
guys very becerfull i allready cut maybe 50 siemense phone but this one is so riscky.
i killed it and i been luck customer was a good guy and except the simence a 52 insted and paid 30 pound lol.
any way good luck to all
 
I cut testpoint and freia work ok
But before few days i play with flashing this phone to ver 7 to input bootcore. I try with ver 079111 winswup. but phone dont accept update.
After that i try flash with ver 11 and when was flash erase done i put cable out of phone and then try to flash 019111.
After that a didnt flash anymore waiting for testpoint solution.
Now i forgot to flash phone with winswup and i cut testpoint.
but after that i join test point together for flash with winswup. and when join phone dont boot. If i cut again i have working freia but dont have working backup.
I found some backup un forum ver 7 but after update phone dont turn on.
Please someone make backup with freia and send me.
But i dont understand why phone dont have boot anymore when i join testpoints.

Regards and thanx in ADVANCE

PS....dont be a fraid of cut.
testpoint solution work.
 
Yes good news
and I killed phone .Found other solution to repair sim problem ?
Procesor solution is last choice.
I tested pin 6 sim card connection to procesor , its good.
 
processor solution is good for badcut repair but 32k sims might not work ( in my case 16k sims working 32k not working) plese post results to confirm
 
hi guys
today i'm test TP in cf62v11. woriking. very great. need very carefully cut test point. 1-3 times. unlocking with freia10 select m55. now my unlocked and good working.
thank you to all
 
I think the patched version will be OK too... it is the same as M55 except different read/write regions.

@ednacell
Nice posting- thank you very much!!

@fuzionGSM
It's like C60/C61. Take an x-acto and cut gently along the yellow line (nothing visible to cut on board). Test if bootfile is accepted. If not, cut more. Repeat until unlocked. If you cut too deep you can damage the phone so I recommend this slow method, at least until you're really comfortable with it.
 
i have problem to unlock my cf62t after cut testpoint. please help

FREIA - Engine build 15, Frontend build 11
COMM_LoadBoots : selected phone family is 13
TTY_OpenCOMPort : opening Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.02
SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI
COMM_LoadBoots : EEPROM IMEI (17) is corrupt
COMM_LoadBoots : original IMEI is 35348200650086 (locked)
COMM_LoadBoots : found SIEMENS CF62 lg95 v84 (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201
COMM_LoadBoots : phone ids are 945DA3B5 [945DA3B5]
COMM_UpdateIMEIBlocks : update is not accepted
 
Back
Top