E
evan_silbert
Guest
Then try other boot options first, then if not working, cut a little deeper. Be careful though, because if you cut too deep, no sim reader!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
E
evan_silbert
Guest
What model is your Freia set for? Try the seba version...
L
Leslie_B.
Guest
make TP back and there wont be insert sim problem
B
Bulba
Guest
TNX Hot Air from www.************.ru forum.
Q
qwerthj
Guest
Use this soft: http://forum.gsmhosting.com/vbb/showpost.php?p=769364&postcount=58
Freia15 for prodigy never unlocked CF62...
WBR
Freia15 for prodigy never unlocked CF62...
WBR
T
Tinotenda
Guest
does it work in version 84 as well?
N
..::Neo::..
Guest
my phone now shows card error even on FiDo sim witch is locked to
R
rayene1722
Guest
hi every body for cf62 you don't need to cut test point to unlock it there was another thing simple and better and more easy
you can patch boot core with application and unlock it directly
you can patch boot core with application and unlock it directly
W
wbiz10
Guest
i have try this one but i got the same message too
Z
zaccoyne
Guest
can someone please give me a full and basic solution to unlock a cf62.thank you
S
Sandman
Guest
thanks for this info mate...
B,R.
B,R.
G
garcea10ro
Guest
I Have Insert Card In Cf62v11 After Tp Cut
Make Tp Back Wont Help !!!! Under Tp Must Be The Line From Sim Reader
Make Tp Back Wont Help !!!! Under Tp Must Be The Line From Sim Reader
M
Mr_GsmVIP
Guest
I succsesfuly flash phone with winswup ver 11 but now have flash ver 11 and eeprom ver 07.
Phone power on but dont see sim card.
need eeprom ver 11
Thanx
Regards
send it on: [email protected]
Phone power on but dont see sim card.
need eeprom ver 11
Thanx
Regards
send it on: [email protected]
R
rayene1722
Guest
and will put it here in forum this night
C
cniky
Guest
can bee more explicit please?! What too cut, the picture is not clear...
M
Mr_GsmVIP
Guest
I also conect cuted line and have insert sim card again.
We cut t9 and some other line.
But i test with few backup files on forum and now cant turn on phone.
I try flash freia CF62 full flash and bootcore but cant turn phone on anymore.
Then i join testpoint and try to flash with winswup and get error:"CANT CONNECT TO MOBILE WITH BOOTSTRAP LOADER ON COM1".
so i first must alive my phone again and then find solution for sim card.
Any sugestion will help.
Maybe need to flash full flash with M55 .....
Help
Regards
We cut t9 and some other line.
But i test with few backup files on forum and now cant turn on phone.
I try flash freia CF62 full flash and bootcore but cant turn phone on anymore.
Then i join testpoint and try to flash with winswup and get error:"CANT CONNECT TO MOBILE WITH BOOTSTRAP LOADER ON COM1".
so i first must alive my phone again and then find solution for sim card.
Any sugestion will help.
Maybe need to flash full flash with M55 .....
Help
Regards
E
evan_silbert
Guest
Did you change the configuration settings to testpoint? Try all 3 boot options.
N
..::Neo::..
Guest
does any one have version 83 full flash or higher ?
afther tp i get update not accepted
afther downgradeing to ver 7 i can unlocking now but phone is dead
afther tp i get update not accepted
afther downgradeing to ver 7 i can unlocking now but phone is dead
E
evan_silbert
Guest
Maybe we are blind... I see what might be a cut but I am not sure. A red line would be very nice.
V
vandal
Guest
please can you give the link for download of this test point