Need system to repair Z500 IMEI!

  • Thread starter Thread starter area51roby
  • Start date Start date
if you read what i said in my post, which was "if you've got a piece of SOFTWARE that can change the imei on a zxxx phone your the only one who has..........."

please note the "SOFTWARE" word !!!

its obvious theres HArdWARE out there to do it, but theres no unprotected free SOFTWARE to do it.

correct me if im wrong though my friend
 
there are loads of pro's on this forum, sadly im not one of them........

there are also loads of members who claim to be able to do things with phone software that no one else can....this makes them either a pro or a liar !!

which one are you my friend ??

if you can change the imei of a z500 or any zxxx phone with winimei software you must know something that we all dont ?

so without being nasty PUT UP...... OR SHUT UP !

this forum is for members to help each other, and yet your comming on hear claiming to be able to do something with a piece of free software that no one else has been able to do as of yet.

so why dont you do what this forum is here for and either upload your super duper version of winimei or give us all a detailed step by step solution how to do it .

hope ive not offended you my friend.

lolly pop
 
well what can i say.. your a lamer.. stop doing what you are doing because you don't understand a ****. I have been working with repairing mobile phones for over ten years. I have been working for Nokia, Samsung and panasonic for several years. Thrust me i know what i'm doing unlike you....

I think the reason that you wite like you do is because you are jealous that you can't do a simpel imei change, but all the other people can...
 
Sorry i was using my communicator and it's pretty slow, had to fire up the lappy to do a PM
 
With your language i'll bet that the only friend you have is your Minnie the pig pillow...soaked in tears...

Well, you can start reading the posts here in this forum.
Insulting members and bad language won't help you.
I have seen at least 5 posts with the complete solution. The problem is that most of the people only read half of the post and then start screaming in the forums and behaving like a fool, just like you do.
 
no my friend, your also one of your above mentioned people who dont read the full story !!

you've read some of the posts and think that its possible to change the imei number of a zxxx with winimei, but you've never actually done it .

ELCO is a well respected member of this forum,and hes also made it quite clear that it cant be done with winimei !!

hes a pro in my eyes,and i believe someone like him over someone like you.

THERE IS NO FULL SOLUTION ON THIS FORUM THAT WORKS !!!

now prove me wrong...........

a single link will do ?

your a dreamer my friend .

you can become a marter if you can point this invisible link out with the full working solution

cheers
 
i was very surprised when i see all post about this subject!!
some people have to be banned from this great forum.
well, i read all post i try all and finnally i get this

cable lg 3g don't work!!!
7050 don't work!
cable usb +com only work with winimei.

i guess all have usb unlock cable (140v,500.... )

just take Rx and TX and GND from com cable with max232.
put gnd into 19 of usbunlock cable, then gnd to 26+25.

and rx from com to 13 and tx to 14 like z130 com cable .

to all how keep this mistery story!!!
and stop """pm me""" and """post you mail"""""""""shame on all who now about this!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
@ Jocke

your full of crap !

ELCO says you cant do it, and hes made lots of hardware/software for mobile phones.....

what have you ever done ????

why cant you print a single picture of winimei or utms showing the result box with a completed imei repair on a zxxx phone ?

i'll tell you why, cause you have never ever had of repaired a z500 phone in your life !

get over it , your wrong....... be a man and admit it ?

or shut me up and upload a screen shot ? !

the balls in your court mate
 
Well, You don't know anything about me.. Just make a cable that goes to the comport and usb at the same time.. then your done.. The solution is posted.. but people just thinks that you need to short pin 2&3 in the comport.. and thats wrog.. ask Elco.. And he will tell you that this is the solution...
 
firstly, id love to know who should be banned !!

ans secondly, the lg 7050 cable works 10000000% with either the full or 2ND cracked version of ns dongle.

cheers

lolly pop
 
i have read threads that mention this method, but ive also read threads that say it does'nt work as the usb lead ant com port lead both contain rx and tx and joining any wires from the usb to the com port wuld be a waste of time.

the problem im having isnt the hardware,its a software problem i think

the usb cable will read the phone when i connect pins 2 and 3 in the com port, but when i try to write the imei it goes so far and gives the error :

call date empty: fail !!

surely this cant be a hardware problem can it ?

please can you give me a link or even better a diagram of how to join the to leads together.

i have honestly searched every post on this forum and i cant find any schamatics or diagrams to how to do this.

to be completely honest, i only found one referance to actually joining the two cables together,and never found any link where ELCO agreed with it

i appologise for insulting you my friend, can you please help me...... and other fellow members

lolly pop
 
sh~t......

i stand corrected !

i am stupid

come on then, how the hell have you got that to work ?

why are you getting umts to actually read the imei and cal date and yet were all just getting 15 0's for the imei and then cal date fail !

i've admitted i'm a nob, and i'm stupid, but ELCO said it could'nt be done with umts software.

please give us a rundown of what were all doing wrong
 
Thank U for uncoverring the mistery I will test and give the reply.



Yes I have seen all your posts.
But You are so sure !!!!!!
Isn't it simple to do what he did and post you pinout here so we can conferm ??//

I have tryed with 7050 from lg all in one cable see here
and nothing.

So just do a simple think , post pinout for your cable and we can all test
at least no more secret now.

BR
keke
 
i know this sounds stupid, but i never have got this whole idea of pinouts so i cant post mine.......... but, i can 1000000000000000% guarantee, personally that i only ever use the cracked ns dongle (the one with 044005E at the top) and a lg 7050 powered lead.

it works perfect

sometimes you need to do it a couple of times, but it works.

ive done 3 now.

i love helping people, so im not gonna lie !!

please, please, please try it before you post again.

theres loads of people on this forum that will tell you this workd too.

merry christmas

lolly pop
 
Back
Top