A
area51roby
Guest
Pls can i repair a Z500 imei?
Phone now show me 00000000... imei number!
What solution?
THX!!
Phone now show me 00000000... imei number!
What solution?
THX!!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
J
Jocke
Guest
Hmm that image don't show that you successfully repaired the phone.
A
angelsanges
Guest
please post the pinout of the cable you used...
A
auth_repair_cen
Guest
i have the official imei software if you want it
N
nokistein
Guest
Angel, I use LG 8110 cable, com and usb ports, and it doesn
K
Keke
Guest
I can also confirm here that it is not the proble with the comunication:
When he say you must make a cable with usb and com port and the same , it sounds like there is no communication.
The problem here is to restore original "cal date" .
BR
keke
When he say you must make a cable with usb and com port and the same , it sounds like there is no communication.
The problem here is to restore original "cal date" .
BR
keke
J
Jocke
Guest
well, if the cal date is empty.. go in to testmode (from keypad) and write back cal date then... then you problem is solved..
You shall NOT join the wires.. USB goes to USB Rx Tx and comport goes to COM Rx Tx so you need four diffrient wires..
send me a pm if you want more details...
You shall NOT join the wires.. USB goes to USB Rx Tx and comport goes to COM Rx Tx so you need four diffrient wires..
send me a pm if you want more details...
L
lolly_pop
Guest
@ auth
if youve got a piece of software that can change the imei on a z500 your the only person in europe that has got it mate !!!!!!
loads of people thought they had it when they got winimei 1.16 but it does'nt work.
as far as im aware even the new nsdongle that claimed to do it does'nt work.
but if you have got something new that does'nt require any dongle or protection then please share it.
cheers
lolly pop
if youve got a piece of software that can change the imei on a z500 your the only person in europe that has got it mate !!!!!!
loads of people thought they had it when they got winimei 1.16 but it does'nt work.
as far as im aware even the new nsdongle that claimed to do it does'nt work.
but if you have got something new that does'nt require any dongle or protection then please share it.
cheers
lolly pop
L
lolly_pop
Guest
ive posted aprox. 25 times regarding changing imei on z500, and yesterday i received some info from JOCKE a fellow member that made me realise ive been wasting my f*****g time all long
JOCKE led me and a lot of other members to believe that it was just a matter of getting the cables (usb and serial ) just right, and this was the problem...
after a leangthy discussion with JOCKE he said that because id been rude to him... which i was, he wasnt going to give out the solution.
BUT !! just as i was thinking wat a tw*t id bin upsettind JOCKE, he responds to another thread that id posted in regarding cracking d600 winimei and says that NONE.......YES THATS NONE of the winimei software thats been released recently can be used to change your imei unless you have access to the samsung server !!
so this means the JOCKE must have accesss to the server as hes the only person to post a working pic of winime sucessfully changing the imei on a z500.
so, JOCKE you sly fox... youve had me running around for weeks on this and it was all a waste of time mate.
seriously though, no hard feelings mate
lolly pop
JOCKE led me and a lot of other members to believe that it was just a matter of getting the cables (usb and serial ) just right, and this was the problem...
after a leangthy discussion with JOCKE he said that because id been rude to him... which i was, he wasnt going to give out the solution.
BUT !! just as i was thinking wat a tw*t id bin upsettind JOCKE, he responds to another thread that id posted in regarding cracking d600 winimei and says that NONE.......YES THATS NONE of the winimei software thats been released recently can be used to change your imei unless you have access to the samsung server !!
so this means the JOCKE must have accesss to the server as hes the only person to post a working pic of winime sucessfully changing the imei on a z500.
so, JOCKE you sly fox... youve had me running around for weeks on this and it was all a waste of time mate.
seriously though, no hard feelings mate
lolly pop
A
auth_repair_cen
Guest
well i have downloaded it form the samsung web site. so yes i would say it works...
D
digicomuk
Guest
are you going to post it here then?
Z
zeroiceone
Guest
use com cable lg7050 and ns dongle work
E
Elco
Guest
Just take a luck here.You may like it:
L
lolly_pop
Guest
what people are getting mixed up with is that when the programs fails with the error cal date empty : fail "" its not saying it is empty, its saying the complete oppersit.......... the cal date needs to be empty for the program to continue !
if you enter the service menu in the phone *#9998*324# then menu 4 2 2 you will see that the cal date is not empty, but for this program to go past this part it needs to find an empty cal date .
if you try to edit the cal date,even by entering 0000 00 00, it will still have a cal date of 0000.00.00, so the cal date is still not empty ???
so from what i can see, winimei can only work on an empty board that has no original cal date.
ELCO agrees with me that winimei alone cant change the imei on zxxx phones.
no matter what you do with the rx and tx usb and com port wires, it wont make any differance........
i hope someone can prove me wrong.
if you enter the service menu in the phone *#9998*324# then menu 4 2 2 you will see that the cal date is not empty, but for this program to go past this part it needs to find an empty cal date .
if you try to edit the cal date,even by entering 0000 00 00, it will still have a cal date of 0000.00.00, so the cal date is still not empty ???
so from what i can see, winimei can only work on an empty board that has no original cal date.
ELCO agrees with me that winimei alone cant change the imei on zxxx phones.
no matter what you do with the rx and tx usb and com port wires, it wont make any differance........
i hope someone can prove me wrong.
N
nokia_dan
Guest
if i was you use the software from this site www.unlockeasy.com very good software here select descardes
nokia_dan
nokia_dan
T
Tmax500
Guest
This looks very good. Are you going to post it here, or maybe you can send it to [email protected]?
L
lolly_pop
Guest
is that with the real nsdongle or the cracked one mate ?
have you actually done it or have you been told it works ?
cheers for the info buddy
lolly pop
have you actually done it or have you been told it works ?
cheers for the info buddy
lolly pop
L
lolly_pop
Guest
hi dan, which software you refering to mate, theres loads on that site... but none to repair the imei on a zxxx phone that works mate
L
lolly_pop
Guest
jocke, did you realise that when you wrote this post...... you finally admitted that your full of s~~t !!
the reason being that if you actually had a z500 you would know that if you go into the service menu, or test mode as you call it , the cal date is perfectly in tact, and does'nt need "writing back" .
what you've done is is exactly what you said ive done, you've only read half the posts and thought you knew everything !!
the cal date only needs re-writing sometimes when utms or winimei 1.16 is used to directly unlock a zxxx phone instead of reading the codes and entering them manually.
if you read all of my posts on this topic, you will see that ive done my homework on this subject...... and not just guessed
the reason being that if you actually had a z500 you would know that if you go into the service menu, or test mode as you call it , the cal date is perfectly in tact, and does'nt need "writing back" .
what you've done is is exactly what you said ive done, you've only read half the posts and thought you knew everything !!
the cal date only needs re-writing sometimes when utms or winimei 1.16 is used to directly unlock a zxxx phone instead of reading the codes and entering them manually.
if you read all of my posts on this topic, you will see that ive done my homework on this subject...... and not just guessed
7
7ZARK7
Guest
No-Luck Lolly, all that effort with no result. Check PM.