Need Help With C65 Just Beep

  • Thread starter Thread starter laythjg09
  • Start date Start date
L

laythjg09

Guest
hi every body

i have c65 locked i used swap cracked to unlock it after all done the problem is when tried power on the mobile i have white screem and quaqly off but in charging ok the mobile work in normal condition
so i write eeproms by using x65 flasher and eeprom tools
the problem now is just beep
any one can give me easy solution for this problem

when i made log and used mapper and eeprom tools to write it to phone
the eeprom tools cannot write blook 5008 5009 5077

sorry for my bad english i am from iraq
 
Just flash it with SST 5.31 or 5.32 cracked with A65 V15 Good Flash, check your Flash Chip first AMD or intel
 
bos write eprom in sst crack then uncheck the boot core then phone repair enjoy...
 
you can friea full flash and direct unlock no map is saved use original imei thats ok
 
I have already repaired SL65 and C65 by this way:
Use papua with TP and select Replace 76,5008, 5009, 5077
work fine and phone live again and it's very fast.
I think by this way you don't have to flash it again.
If you need to flash it good way is Vklay with speed virtual com
Pl2303, SIS2101 or FTDI are good and tested
Vklay don't work fine across the RS232 and Max32
but you must add the password boot in the Vklay ini file
 
1- i flashed the phone with v12 and write eelite by x65 flasher
2- i used winswup and upgrade the phone to v50 and it still dead(when power on just beep)
3- i used eeprom tool and i wrote "eep back" found it in the forum and some error in write i ignor it
4- i used the steps of unlocking by using paupa and mapper
5- in the last i wrote a new map to phnne with error in 2nd and 3rd and 4th block
unpluged my phone and i pressed power on it work good again
sorry for my bad english
 
Back
Top