My jeep won't start? Please help! Thanks!?

  • Thread starter Thread starter bass7248
  • Start date Start date
B

bass7248

Guest
My car wouldn't start so a tow truck came and declared that a fuse was blown. It was a 20amp fuse. He had one in his car and once he put it in all the relays started clicking and the car started right up. But once I put it in drive and the car started moving it stalled. So we used another fuse and put in neutral and pushed it and it stalled again. Any help would be greatly appreciated. Thanks guys. It is a 1998 Jeep Grand Cherokee TSI btw.
 
well see what circuits are on that fuse that keeps blowing. Obviously is going to be the ECM(PCM), transmission....something key to the system functioning.Do NOT simply put a larger amperage fuse in it...you will cause more damage. Possibly fuel pump circuit could be many things find out and either track down the problem or send more info our way. good luck
 
well see what circuits are on that fuse that keeps blowing. Obviously is going to be the ECM(PCM), transmission....something key to the system functioning.Do NOT simply put a larger amperage fuse in it...you will cause more damage. Possibly fuel pump circuit could be many things find out and either track down the problem or send more info our way. good luck
 
Could be electrical, fuel, or spark issue. I'd use some common sense here and have it towed to a shop and pay to have a professional take a look, same kind of thing if you had a sharp pain somewhere in your body, you'd go see a doctor.
 
Put a 100 amp fuse in it and whichever circuit starts fire was your problem , NOT !!! , take it to a shop , they will use a 20 amp circuit breaker and troubleshoot accordingly .
 
Back
Top