My dad is having car trouble. can anyone help?

  • Thread starter Thread starter Kaleigh H
  • Start date Start date
K

Kaleigh H

Guest
Evaporative Emission System Low Purge Flow-P0497 on a 2005 Honda Civic VP. Any suggestions on how to troubleshoot this problem? Will be buying a systems manual if available.
 
There is a detailed procedure for this in the ALLDATA data base found in many libraries. Start by power washing your engine. Focus on the evap canister and hoses. Examine the hoses for signs of breakdown in the rubber. Clean the vacuum ports on your throttle body with Gum-out. Cheap repair!!! The Evap system only removes vapors from your gas tank as they build-up pressure and harmlessly burns them.
 
There is a detailed procedure for this in the ALLDATA data base found in many libraries. Start by power washing your engine. Focus on the evap canister and hoses. Examine the hoses for signs of breakdown in the rubber. Clean the vacuum ports on your throttle body with Gum-out. Cheap repair!!! The Evap system only removes vapors from your gas tank as they build-up pressure and harmlessly burns them.
 
You won't be able to solve this on your own. Very, very common problem on any vehicle newer than 1996. EVAP codes are the hardest codes to find. Basically, all this does is ensure there are no fuel vapours exiting to the atmosphere, absolutely does not affect how the vehicle runs, or anything, just turns on the light so you take it in to get it fixed.

What's going to happen is when you take it to a shop, they will hook up a smoke machine, essentially a machine that creates smoke, to the EVAP port under the hood (has a little green cap on it) and pump it full of smoke. Wherever the smoke comes out, is a leak.

Some cars are more sensitive than other to this. Some will put on the light if there's a hole 1/20000th (yes, 1-twenty thousanth) of an inch.
 
Back
Top