Modding original ME45's data cable?

  • Thread starter Thread starter bbs_shifty
  • Start date Start date
B

bbs_shifty

Guest
HI there, how can I mod a me45 data cable ( the original one, marked as rs-232, that came with the phone)), so that i can use it to update the phone software and change its IMEI?
I've read that i should use 4.5V battery, connect its + to the 4th PIN and the - to the 1st PIN of the data cable. But when i opened the cable i saw that there are already wires in these pins, should i remove them i use conection with the battery instead of them or the battery should work as extra voltage for them ( connect the battery without removing these wires).
Danke!
 
battery 4,5V:
- of battery joint to PIN1 togheter with other wires
+ of battery joint to wire that is sealed to PIN4, desoldering it from PIN4
 
Hello!

I'd like to ask You how to connect the SL45 PINs in case I want to use a
charger and in case I want to make an USB connection with computer
(one for charging and one for data transfer).
I would be grateful if U reply to me with solution.

The charger seems to be connected to PIN 1 (minus pole) and to PIN 3 (plus pole).

I'm wondering in a device (a projector) that can project the current time
to the wall (like in sx1)!
What's Your opinion?

there's a good homepage "http://sl45.sjostedt.no/?page=mods", but in
the "Minijack" window the "External links:" are not working!

If I can tell U something about my experiences let me know.
I have already built a laser, a led (one UV for money detection and one
superbright led), a minijack and a microphone input.

MoDrone, Hungary
 
Back
Top