MC60 Bootcore.

  • Thread starter Thread starter Mojo85
  • Start date Start date
I just did unlock, it works!!!!!!!!!!!!!!!!!!!

Here is what I did:

1. Flash with Friea15 MC60 Boot "SIEMENS MC60 BOOT LGX VFF" Select Firmware NOT Bootcore/EEPROM)
2. Flash phone with Friea15 MC60 (NOT MC60 Boot) with FuBu Flash MC60. 14mb (Big File)
3. Flash with Friea15 MC60 (NOT MC60 Boot) with eepprom file (select eeprom1 NOT firmware/Bootcore).
4. Unlock with Friea15 "Unlock with no map save, use original imei"
5. Phone works!!!!!

Mr.shurubelul, your a good man, I hope this helps somone else.
 
Get another, working, MC60 and read MC60 boot firmware.
Flash it to the dead one and all is ok.
Now unlock your phone as MC60 and all is done
 
i flashed mc60 blue screen with martech,
and is still blue screen,it gives me a beep and
it goes off again any help.
 
try to repair it with joker
-put phone in service mode
-do "del instances"
-do "defrag eep"
 
Hello friends MC60 with blue screen flashed with frea. I was same.
After I flashed again with MC60 boot but it become dead permanently
Any help
 
Hi, I have a problem with my Siemens MC60. I tried to flash it with joker, but I unterruppt the flash by accident. After that the phone startup with blue screen and a beep. I treid to repair it by do backup the Eeprom and Bcore in the backup file. After this the phone goes on with white screen and melody, but no the Text? I can call and do all functions blind, without see anything. I tried to play the Maps with mapinit, but the same failure.

Can please someone tell me what to do? how to repar it? I have a seriell Cable.

Wich part of the phone is responsible f
 
I am also looking for the flash files needed for this procedure here anyone got any links to them as i only have access to SST support and there flash collection sucks.
 
oh no, I found out too late with the contrast and I did that whit joker:

Put phone in Serivce mode
do del instances
defrag eep

after that the phone was dead, I try to repair it with freia15,
1. took the BOOT core "Siemens MC60 BOOT LGX VFF
2. flash phone with FUBU MC60
3. flash with old backup Eeprom flash file because I didn
 
Finally managed to get all files needed but phone is still the same powers on,screen lights up then buzzz and switchs off again. Have tried this method here http://forum.gsmhosting.com/vbb/showpost.php?p=1227934&postcount=14 with the following flash files all i could find nearly all links seem to be old and dead.

SIEMENS MC60 BOOT LGX VFF - 00800000.FLS
SIEMENS MC60 LG95 V10 - 00200000 full.FLS
SIEMENS MC60 LG95 V10 - 00FC0000 eprom.FLS

Then i unlock no map saved using origanal IMEI with Freia.

I have also tried the following http://forum.gsmhosting.com/vbb/showpost.php?p=2135210&postcount=26 but all that seems to happen is i get a blue screen for a bit longer before the white screen and then buzz and off.

But still have these files here if anyone else needs them but as said not working here so any ideas would be apprciated.

BR

MAttYB
 
Full flash ur phone....If u have higher
When completed... press send key then press recall key...Success u.
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
http://www.gsmegypt.com/support/PINK_FLOYD/simense/
 
Where I can found Full flash file? is that the FUBU?

But with joker it says wrong size?

Ok, now I found the FUBU by gsmegypt, but whit which soft?
in friea is no send key recall key?
 
Use old exe..2.something
Tik-IMEI option and copy imei from text information board.
_________________________________________________
HERE is Flasher_ flash file
http://www.gsmegypt.com/support/PINK_FLOYD/simense/

Or u can contact with me at msnger

[email protected]
 
Sorry, I have no masnger
I flash most nokia phones, but this is my frist siemens phone.
could you explain more in steps what to do please?
 
Back
Top