kp 170 no signal after unlock

  • Thread starter Thread starter evolutions
  • Start date Start date
E

evolutions

Guest
I HAVE GOT KP170, AFTER I UNLOCKED IT ON VYGUIS BOX IT IS NOT SHOWING ANY SIGNALS. I HAVE FACTORY RESET IT TOO AND FLASHED IT AS WELL. BUT NO LUCK. CAN SOME ONE HELP ME OUT IN THIS PROBLEM..
 
flash with furious gold 100% ok
with this file: KP170AT-00-V10g-EUR-XXX-OCT-23-2008+0

tested by me
 
First you need to know which box you unlock IT. if the box make any eeprom backup, then you might get the network again by just flashing the phone with its original eeprom. Else need to read a full LG phone and copy it to your phone.

Cheers and tested 100% work.
 
if u have infinity box select model kp 215 and write this file KP170_eeprom_calibration_04.B1E.bin
100% tested
 
COM3 [VCP0] selected
module v1.39
Device: LG-KP215
Checking data, wait...
advanced flash detection enabled
Action: flash write
Skip: Firmware (code)
Skip: File system
Skip: Alchemy data
Write: Eeprom
"smart write" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E223C2200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
id: 00005283
Boot Done
Set baud ...
921600
Set baud Done
Check flash ...
current eeprom imei: 350305260000001
file saved: C:\Documents and Settings\Farrukh\Desktop\eeprom_350305260000001_LG-KP215_20100223-184608.B1E.bin
................................................................
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write: Eeprom
flash: 01227E223C2200:FEEA0000000000
Write Done
Finished, time used: 42 sec
Remove/Install battery now !
 
100% working solution tested today


here the log

COM5 [VCP0] selected
module v1.39
Device: LG-KP170 (under test)
Checking data, wait...
advanced flash detection enabled
Action: flash write
Skip: Firmware (code)
Skip: File system
Skip: Alchemy data
Write: Eeprom
"smart write" active
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E223C2200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
id: 00005283
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current eeprom imei: 350305260000001
file saved: C:\Program Files\InfinityBox\LGA\eeprom_350305260000001_LG-KP170 (under test)_20100305-182751.B1E.bin
................................................................
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write: Eeprom
flash: 01227E223C2200:FEEA0000000000
Write Done
Finished, time used: 76 sec
Remove/Install battery now !
 
i have the same model unlock with infinity and than after it goes to imei 0000000000000
wat to do now wat is the solution
 
write orignal imei from the back your phone and write it with infinty box.
it will work
100% ok
 
Back
Top