J
jeldrity
Guest
ok so i have a PERFORMANCE TEKNIQUE 2400w MONO pushing 4 comp 10s (c10) and i want to up grade to better subs but dont want to change my amp too.
so what do you think would sound better ...
4 cvr 10''s....(A lil under powerd)
2 l5 10''s...
1, L7 15",...
2 l7 10s ( a lil under powerd)
or 2 comp 15s.
please let me know what would bump hard and sound the best...
oh and the l7 15 would be in a ported box at 35hz
here are the amps specs.
FEATURES
*2400 Watts Digital Mono Block Amplifier
*1 Ohm Stable
*Max Output Power: 2400 WATTS @ 1 OHM
*1000 watts RMS @ 1 Ohm
*800 watts RMS @ 2 Ohm
*450 watts RMS @ 4 Ohm
*High Current Amp
*Huge 80A fuse
*CLASS "X"
*Low heat emmission
*More Efficiency than other Class D Amp Designs
*Digital mono block design
*Built in low pass crossover filter
*Crossover Slope 24DB per Octave
*free bass knob
*Daisy chainable (you can connect 2 of these amps togeather to run 1 *load of subs (1, 2, 3, or 4 subs)
*Input Sensitivity Control (6V to 0.2V)
*Bass Equalizer Control
*Bass Frequency Control
*Phase Control
*Adjustable Bass Boost - 0 - 18 dB
*Wired Bass Remote Control
*Gold Plated Terminals & RCA
*RCA Pre-amp output
*2 gauge power terminals
*High Efficiency Low Heat Emission
*High Damping Factor For Improved Bass hits
*Uses Less Energy from the car battery, so your lights don't need to dim, and you can still have a lot of power!
*Real 1-Ohm stability means this amp will stay cool, after pounding for days straight, with 2 dual voice coil 4 ohm subs running down to 1 ohm. Other amps may say 1 ohm stable, but this one is truly 1 ohm stable!
2 comp 15s
so what do you think would sound better ...
4 cvr 10''s....(A lil under powerd)
2 l5 10''s...
1, L7 15",...
2 l7 10s ( a lil under powerd)
or 2 comp 15s.
please let me know what would bump hard and sound the best...
oh and the l7 15 would be in a ported box at 35hz
here are the amps specs.
FEATURES
*2400 Watts Digital Mono Block Amplifier
*1 Ohm Stable
*Max Output Power: 2400 WATTS @ 1 OHM
*1000 watts RMS @ 1 Ohm
*800 watts RMS @ 2 Ohm
*450 watts RMS @ 4 Ohm
*High Current Amp
*Huge 80A fuse
*CLASS "X"
*Low heat emmission
*More Efficiency than other Class D Amp Designs
*Digital mono block design
*Built in low pass crossover filter
*Crossover Slope 24DB per Octave
*free bass knob
*Daisy chainable (you can connect 2 of these amps togeather to run 1 *load of subs (1, 2, 3, or 4 subs)
*Input Sensitivity Control (6V to 0.2V)
*Bass Equalizer Control
*Bass Frequency Control
*Phase Control
*Adjustable Bass Boost - 0 - 18 dB
*Wired Bass Remote Control
*Gold Plated Terminals & RCA
*RCA Pre-amp output
*2 gauge power terminals
*High Efficiency Low Heat Emission
*High Damping Factor For Improved Bass hits
*Uses Less Energy from the car battery, so your lights don't need to dim, and you can still have a lot of power!
*Real 1-Ohm stability means this amp will stay cool, after pounding for days straight, with 2 dual voice coil 4 ohm subs running down to 1 ohm. Other amps may say 1 ohm stable, but this one is truly 1 ohm stable!
2 comp 15s