Kawasaki bike expert please?

  • Thread starter Thread starter Trust_in_myself
  • Start date Start date
T

Trust_in_myself

Guest
I have a 92 kawasaki zx250c (Ninja)
The ignition wiring is messed up.
It has 2 coil packs, 1 cdi unit.

From the engine run switch(kill switch) and engine crank(start) it has 4 wires coming out. Do you know where they go?
When I crank straight through the starter, there is no spark.

The bike is only left with a 2pin clip which goes straight to the starter motor circuit, but the engine run/starter switch has a 4 pin clip!
So I can't figure out where the engine kill wires go and connect. I bought the bike in pieces and nothing seems to be missing in the wiring.

I couldn't find the proper wiring diagram because it's an import. It's a zx250c Kawasaki known as ninja.

Thanks
 
The right hand switchgear loom sometimes plugs into the left hand switchgear loom which in turn plugs into the main loom.

I'd lay out the loom on the floor and place everything that connects to it next to it in its proper place.

A lot of plugs will only fit one other plug on the loom.

If you google a workshop manual you can often download one for about £6

good luck and stay patient.
 
Kawasaki GPX250 R Ninja (EX250 F2-F19) 88-05 Supplementary Service Manual ENG

http://www.megaupload.com/pl/?d=Y647EHKH

try here..

or here..
http://www.bikechatforums.com/viewtopic.php?t=140295

or here

http://www.dansmc.com/shopmanual2.htm

free manual downloads... wiring diagrams..
 
You could speak to other Kawasaki owners and seek their help. OR you could write to Kawasaki and ask for a proper wiring diagram. I am sure they will guide you correctly.
 
Back
Top