K310i Please Wait Solution?

  • Thread starter Thread starter Kanwalgee
  • Start date Start date
no need any type of TP just use cruiser after full flash with cruiser use supplimentry.exe (u can download from cruiser support area)ur problem will be solved 1000%
 
Here compleat Debug log do i copy from text file and also attach txt file what,s your opinion about that problem.

FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Re-allocated block LUT from 24569 to 38778 logical blocks
FSFLASH: Stage 4
FSFLASH: VALID block 4483 @ 0x45FAD000 is newer
FSFLASH: VALID block 6197 @ 0x45FADC00 is newer
FSFLASH: VALID block 6199 @ 0x45FFC000 is newer
FSFLASH: VALID block 22972 @ 0x46023400 is newer
FSFLASH: CLEAN blocks 1022
FSFLASH: MIN CLEAN blocks 512
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Re-allocated block LUT from 24569 to 38778 logical blocks
FSFLASH: Stage 4
FSFLASH: VALID block 4483 @ 0x45FAD000 is newer
FSFLASH: VALID block 6197 @ 0x45FADC00 is newer
FSFLASH: VALID block 6199 @ 0x45FFC000 is newer
FSFLASH: VALID block 22972 @ 0x46023400 is newer
FSFLASH: CLEAN blocks 1022
FSFLASH: MIN CLEAN blocks 512
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Re-allocated block LUT from 24569 to 38778 logical blocks
FSFLASH: Stage 4
FSFLASH: VALID block 4483 @ 0x45FAD000 is newer
FSFLASH: VALID block 6197 @ 0x45FADC00 is newer
FSFLASH: VALID block 6199 @ 0x45FFC000 is newer
FSFLASH: VALID block 22972 @ 0x46023400 is newer
FSFLASH: CLEAN blocks 1022
FSFLASH: MIN CLEAN blocks 512
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
 
try use crusier
1st step unlock rsa
then direct unlock
and then flash that phone
post ar result
 
USE CRUISER FLASH PHONE
MCU ,FS THEN COSTOMISE THE PHONE
AFTER THAT ATTACH THE PHONE SHOT DOWN FS , UNLOCK AND FINALISED GDFS IF PHONE NOT OK CONTACT ME ON YAHOO MASSENGER
THIS IS MY ID [email protected] and i will give u more details
sorry for my english
 
Hi to all

It's a Hardware problem the new semc cheapest phone is very bad quality flash chip . so just rehot the flash and power ic.


WBR
Bluffmaster
 
please help me how can i unlouk test point k310i
give me test pointvideo and full pic
 
if cid 49 then it free just flash it and goto setting tick change imie when unlocking and unlock it
 
my k310 not connect on software i allreday change jeack nd wash all bord any one gine me good solution.

best regards.

TAIMOOR KHAN.
 
stay in empty fill
unchecke sign mode
and write gdfs in ssw format in firmware area.
-after write this write erom
db2012_erom_cid50.ssw
and flash with cid50 file
 
1. Change USB IC (In my experience, some technician remove the USb IC due to "OFF-Mode leak problem" please check whether it exist or not.)
 
Back
Top