R
retstocks
Guest
My 1995 Buick is throwing two codes when the check engine light comes on ( P0341 & P0342) I know both these codes refer to the Camshaft position sensor but the "traction control" light comes on each time check engine light comes on with these codes.
When the CIL light goes out (every other start) the traction control light goes off as well.
I have changed the camshaft position sensor but the car behaves the same. I have gleaned from my research that the problem could be the wiring harness (not available from Buick).
I have cleaned the wheel sensors and all seems fine with them.
With the exception of the lights coming on the car has no symptoms, starts well, runs smooth, good mileage and power.
My question is:
1) Can this traction control light be related to the check engine light considering they come on & go out together and the only codes are for the camshaft position sensor?
2) Can the harness be removed and rebuilt by hand or is there some place that sells these harness's after the factory discontinues the parts?
Any input would be appreciated, Thank You.
When the CIL light goes out (every other start) the traction control light goes off as well.
I have changed the camshaft position sensor but the car behaves the same. I have gleaned from my research that the problem could be the wiring harness (not available from Buick).
I have cleaned the wheel sensors and all seems fine with them.
With the exception of the lights coming on the car has no symptoms, starts well, runs smooth, good mileage and power.
My question is:
1) Can this traction control light be related to the check engine light considering they come on & go out together and the only codes are for the camshaft position sensor?
2) Can the harness be removed and rebuilt by hand or is there some place that sells these harness's after the factory discontinues the parts?
Any input would be appreciated, Thank You.