I HAVE A FORD 96 EXPLORER...INTERIOR LIGHTS DO NOT WORK WHEN U OPEN THE...

  • Thread starter Thread starter Rick P
  • Start date Start date
R

Rick P

Guest
...DOORS..NO SHOUTING HERE? I HIGHLY SUSPECT A ENTRY MODULE TO CONTROL LIGHT TIMING.
I HAVE CHECKED FUSES AND FOR RELAYS.
FUSES GOOD ACCORDING TO MANUAL..NO RELAYS??
I CAN NOT FIND THIS MODULE OR ANY REASON FOR INTERIOR LIGHTS NOT TO WORK.
ROTATING DIMMER ACTIVATES TWO CEILING LIGHTS BUT NOT THE LIGHTS ON THE DOORS.
I CAN NOT FIND ANY INFO IN HAYNES MANUAL!!
MY TEMPERATURE CONTROL DOESN'T WORK EITHER.
IT IS AN ELECTRICAL SWITCH AND NOT CABLE...STAYS HOT ALL THE TIME...WILL NOT GO COOL.
PLEASE COULD SOME ONE ADVISE ME.
THANK YOU
 
regarding the door lights, you need to test the sockets for voltage. If there is voltage, it is a lamp bulb. if there is no voltage, you need to test the circuit and the switches. It could be an open in circuit or other.

The heater controller may be due to the heater valve at the heater hose, voltage loss, or vacuum leak, misrouted hoses/wiring- and such.
you need to verify the heater valve functions or hot water will feed the heater core as long as it is open (or perhaps bypassed -i.e. missing)
 
Back
Top