How to use Sensor Tool to fine tune SL45 battery

  • Thread starter Thread starter trustkill
  • Start date Start date
Hi all ...

sorry interupting ..
where can i get the sensor tool ? or where can i download ?

thx
 
Hi all ...

sorry interupting ..
where can i get the sensor tool ? or where can i download ?

thx
 
Answers:

-I think my blk for 1000mAh will work correctly with Your 1100mAh battery.
If isn't than make a copy first of Your phone's blk to winchester.
U can reupload that old blk anytime.

-U don't need to have the battery fully charged to do this.

-10-20 secs waiting is an experinece, 'cos the program don't recognize Your mobile if U connect just after U have clicked on "write phone".
 
Thanks krafte, I see what you meant. I'll find it, and I will inform you about result.
 
@vizionar: http://sl45y.czweb.org/download.htm
or: http://www.siemens-sl45.net/soft.php
Good luck!
 
is theer anyone who knows wht it means the other sites? for example vbattdsp 1 ,vbattdsp2 - vbatt1, vbatt2....
i want to calculate myself do i need to write all of them?
 
My battery is OK, last about 4 days; but my problem is battery indicator on screen is not exactly. It's often full (100%), or 80% or 60%, phone often warn battery empty when 80%, sometime when 60%.
I don't know if it's caused by blk or other reason.
Who can give me 1200mAh blk for sl45iv56? My email is [email protected]
Thanks in advance.
 
My solution is writing original firmware to phone. It may better than now. I'm testing and I'll inform about my result.
 
crash course siemens sensor tool 1.3

1.

full charged battery (charge externly not in phone)

VBatt1 = voltage measured by an extern voltmeter*
VBattDSP1 = VBattDSP value shown by Sensor Tool


2.

empty battery (as empty as phone turns off without any warnings)

VBatt2 = voltage measured by an extern voltmeter*
VBattDSP2 = VBattDSP value shown by Sensor Tool

3.

press "calculate" and write to phone.


*all values in mV

I can't garantee correctness because i didn't test due I dont have
the voltage sensor address of my phone(SL45v56) that is needed to
read VBattDSP
 
Thanks krafte.
I tried, but I don't know why Sensor Tool couldn't display VBatt, BatTemp... (in Sensor round) of my SL45, so I couldn't calculate my battery value; while it could do that on my C35i.
I wonder that my SL 45 lacks something to display them.
So I hope someone explain to me: What is it? It's about hardware or firmware? How can I add it in my SL45?
Thanks in advance!
 
If your battery is too old, pls replace it. I think that new blk cannot increase standby time. I'm testing my phone and when ending, I'll give some new information.
 
like i said before Sensor tool needs the address of the intern voltage sensor to read VBattDSP.
You need to add an entry to the ini-File of Sensor Tool with your hardwareId, softwareId and sensoraddress. e.g for SL45v56 "HW31SW56=[VBattDSPaddr]"

I'm looking for this address but no one could say it to me yet.
 
@sl45vietnam

Any results last time?

My personal conclusion for this topic is. All mobiles got different sensor settings. The sensor is NOT fix for different battery types. Why? Because the standard battery of the SLIK is a 540mAh one, Siemens offical sells/solds 800 mAh battery type. And now the argue. If someone bought the battery with the longer durance do you think he is in need to run to the next Siemens shop to recalibrate the sensors? No in no way. So it's a big big rumour that there are SPECIAL blks for 540/850/1000 and maybe the new 10000000000000000000000000000000000 mAh cells (from Starship Enterprise!!). The voltage of all types is the same - 4250 mV is maximum and the phone switches off if the battery is near 3800 mV. It's not a questione of the Ampere it's the Voltage. Sensortool is usefull for fine calibrating!
_______________________________
But back to topic. I also heard if you downgrade to maybe v52/54/55 (via WinSwup not a third person Fubu!) the battery lasts for a longer time. Can someone check this?
 
After I'm useing Sensor Tool 1.3 my telephone is crashed. When I try to on, it lighting on for 1 second and off after this. I can't doing nothing!!! HELPPPPPPPPP CAN I RESTORE MY PHONE TO WORK!? I'm full flash with v56 all my phone again, but it nothig different, when I'm still hold the red buton, it lightening for 1 second(ot the display nothing), and after them it off!!! WHOT I CAN DO!???
 
@cyberghost

Yes, sure its for fine calibrating. And yes in the higher Voltage area ther is no difference between 500mAh and 1000mAh but bigger batteries last longer in the "low voltage"(about 3,8 V) area than the small original batteries. So the phon would shut down although there are resources, because the phon thinks the voltage will lower faster than it does, so if u have a bigger battery 1250 mAh it makes a clear difference.
 
Hi, I think that mAh is effect on working time of phone, although it don't effect on voltage of battery. So I'm sure that 540mAh battery has lasting time shorter than 1000mAh one.
My result is: After writing original FUBU into phone, the battery indicator is correct, but it don't increase standby time. My phone shut down when voltage over 3700mV, it is about 4220mV when full charge. Standby time about 3 - 3,5 days.
Someone from my coutry said that he can find out the suitable values for each battery, but very difficult and waste time, and if he buy a new battery he has to look for new values, although choosing only one kind of battery.
Oh, it is very difficult to know why SL45 has the big problem on battery?
 
Back
Top