I have installed a pole of height 25 feet. It weighs around 70-80 kg and has a diameter of 4 mm till a height of 21 ft and diameter of 3 mm above 21 ft. The foundation made for the pole is 1 ft above ground level and 3 ft below ground.
The threads in the nuts used to tighten the screws are not enough to use two nuts, so we can only use one nut and washers.
Now, the problem is that the pole is not able to stand still even if very little wind blows. It starts waving if wind blows. How can I make the pole to stand still.
The threads in the nuts used to tighten the screws are not enough to use two nuts, so we can only use one nut and washers.
Now, the problem is that the pole is not able to stand still even if very little wind blows. It starts waving if wind blows. How can I make the pole to stand still.