trucker460
New member
Just to let you know. It's not an easy job.
With any luck you have bucket seats.If so remove the pasenger side seat. Open the hood and remove the heater hoese from the fire wall.
Under some puddy on the fire wall there are 10 or 12 nuts to be remover. Under the dash you now can slide the heater box out.
Once you get it half way down you now remove the vent cable and as you pull the paseger side down and out around the shifter.
Once you've got it out there is a plate on the top of the box with one small bolt in it. remove it and then remove the core.
Install in reverce.
If it goes as easy as it sounds then you're doing better then I ever did.
Any other questions email me.
With any luck you have bucket seats.If so remove the pasenger side seat. Open the hood and remove the heater hoese from the fire wall.
Under some puddy on the fire wall there are 10 or 12 nuts to be remover. Under the dash you now can slide the heater box out.
Once you get it half way down you now remove the vent cable and as you pull the paseger side down and out around the shifter.
Once you've got it out there is a plate on the top of the box with one small bolt in it. remove it and then remove the core.
Install in reverce.
If it goes as easy as it sounds then you're doing better then I ever did.
Any other questions email me.