How to FULL FLASH SL75 in Papuas?

  • Thread starter Thread starter kasamiko
  • Start date Start date
K

kasamiko

Guest
I got an SL75 and i messed with Papuas FFS Format by formatting EEFULL area..

But as Papuas warning...I got a FULL BACKUP of my phone but don't know how to flash it back....

All i can see in Papuas is READ Flash but no WRITE flash..I have read in some part of the forum they flash it with V_Klay but I don't see any SL75 model there..

Any suggestion will be appreciated..

BR
 
If you have not found a solution yet :

Produce a .VKD (loader) for V-Klay from PapuasUtils and transfer it the loaders section of V-Klay , in order to be used...
But first you must already have calculated correctly a BKEY (or BootKEY) for that to work...
Although, I guess that since you don't have EEFULL, you may need the TP (testpoint) choice of bootloader.
I don't remember well, but if BKEY is stored in block 52, then it is on EELITE , and then you have it there, so you can try with BKEY... But I am not sure.
TP (testpoint) will work always...
(PapuaUtils does NOT Write fullflash..., but may be used to calculate New security EEPROM blocks, but you are missing all EEFULL !)

Alternatively, in normal cases, you can use latest 'xflasher-2013' and do a 'Write flash' ... You can try that , to see if it works with TP, or alternatively with BKEY or even if SKEY entered on phone.
 
Maybe the easier way is :

Use PapuaUtils 'Convert' page and function 'Conversion FullFlash in XBI or UserSwup' to make a Custom Winswup fw update .exe file, from your FullFlash.
Be sure to have included EEFULL & EELITE, as it is by default.

Then use it as a usual FW update , that will have your original EEPROM ...
 
hi guy...
maybe your phone has AMD chips... intel fubu maybe can't work.
sl75 fubu is 96mb.
try to use the latest version of papuas from a1ex(1.11b) or gehstock(0.97, correct if i'm wrong).
you can try only recalk your good fubu with papuas from a1ex and reflash with x65flasher.
if you have a good backup, the recalk process will not generate any error.
if u get some error, try to search other fubu.
if you need to use tp, doesn't need remove bga, try to use the "easy tp" method(search in this sub category).
or u can try the XBI/WINSUP method. it's better make XBI/XBZ and use the latest WINSUP, because the most commons files to make ur own EXE using papuas are too old...
 
u must read Full Flash (96MB) from working phone with x65flasher
then Flash it into ur dead phone
extract eeprom from the readed Flash with x65 Flasher, and Recalculate Eeeprom .fbk with latest papua by a1ex
restore it into phone with x65 flasher

if the bcore is ok, ur phone must work
if not, recalculate key with skey 142345678, then extract bcore from working Flash with winhex, and edit imei and hash in bcore
then load the bcore with Vklay


this appear difficult, but it so easy
 
Actually my phone is NOT DEAD...

I only HANG to welcome note ( Siemens Mobile World ) if there is a sim card..


Which X65 flasher? like this one attached? I can't connect my phone with this..but working with Papuas..

See attached image


No working with X65 Flasher:







but works with Papuas..
 
Where can I get x65flasher-2103??

Tried searching here but found no link to DL..

UPDATE:

Thanks anyway...found it here

http://chaos.allsiemens.com/download/x65flasher-2103.rar

Post result later...

TIA
 
Back
Top