A regular tool box (Just big enough to hold all of the equipment)
Socket Adapter 1/4" drive to 3/8" drive
Socket Adapter 3/8" drive to 1/2" drive
Socket Adapter 1/2" drive to 3/8" drive
Bar, rolling head 18"
Cold chisel, 5/8" cut
Feeler gage set, (.0015" to .035") (.038mm to .889mm)
Spark plug gap gage, wire type
Ball peen hammer, 24 ounce
Soft face hammer, 24 ounce
7" diagonal cutting pliers, 6"
Needle noise pliers, 6"
Common pliers, 6"
Adjustable pliers9"
Center punch, 1/2 x 4 1/2"
Pin punch set
Steel rule, 6" with cross bar
4 screw drivers, flat blades (A 4", 6", 8" and 12")
Screw driver Phillips #1 4"
Screw driver Philips #2 4"
Adjustable wrench 10"
Combination wrench set 1/4" to 1"
Combination wrench set 6mm to 19 mm
Please tell me the total cost of all of this, thanks
Socket Adapter 1/4" drive to 3/8" drive
Socket Adapter 3/8" drive to 1/2" drive
Socket Adapter 1/2" drive to 3/8" drive
Bar, rolling head 18"
Cold chisel, 5/8" cut
Feeler gage set, (.0015" to .035") (.038mm to .889mm)
Spark plug gap gage, wire type
Ball peen hammer, 24 ounce
Soft face hammer, 24 ounce
7" diagonal cutting pliers, 6"
Needle noise pliers, 6"
Common pliers, 6"
Adjustable pliers9"
Center punch, 1/2 x 4 1/2"
Pin punch set
Steel rule, 6" with cross bar
4 screw drivers, flat blades (A 4", 6", 8" and 12")
Screw driver Phillips #1 4"
Screw driver Philips #2 4"
Adjustable wrench 10"
Combination wrench set 1/4" to 1"
Combination wrench set 6mm to 19 mm
Please tell me the total cost of all of this, thanks