How do i put my 98095 PlayStation 3 Bluetooth Headset in paring mode?

M

Modern Warfare Kombatant

New member
probably same as any. hold down the power button till it comes on and keep holding it till you hear a second beep or whatever then hit scan button under audio devices it should pick it up and then your paired and if it asks you for a security code almost always default is 0000. good luck dude.
 
Here ya go !

Use the USB cable to pair the headset using the PlayStation 3 automatic mode.

1. Check that the PlayStation 3 is turned on.

2. Check that the PlayStation 3 system software is version 2.50 or later. If you have an earlier version you must update the system software before you can use the automatic mode for pairing.

Insert the mini-B connector of the supplied USB cable directly into the USB connector on the headset. Insert the other end into the USB connector on the PlayStation 3.

The power indicator on the headset lights up solid green for two seconds to indicate that the headset and the PlayStation 3 have been paired.

After registering the Bluetooth Headset, you will need to set the headset as the input / output device


You can also pair the headset using Bluetooth Discovery Mode

1. Check that the PlayStation 3 is turned on.

2. Press and hold down the power button on the headset until the power and mic muting indicators flash alternately in green and red, indicating that the headset is in Bluetooth discovery mode.

3. In you PlayStation 3 home menu, go to Settings icon (Settings) > Accessory Settings icon (Accessory Settings) > [Manage Bluetooth Devices].

4. Select [Yes] to pair (register) the headset with the PlayStation 3.

5. Select [Start Scanning]. The PlayStation 3 scans for the headset, and displays a list of all Bluetooth devices within range.

6. Select "Wireless Headset". When prompted for a pass key, enter "0000".

7. The headset is now paired with the PlayStation 3. After registering the Bluetooth Headset, you will need to set the headset as the input / output device. See instructions below.
 
probably same as any. hold down the power button till it comes on and keep holding it till you hear a second beep or whatever then hit scan button under audio devices it should pick it up and then your paired and if it asks you for a security code almost always default is 0000. good luck dude.
 
probably same as any. hold down the power button till it comes on and keep holding it till you hear a second beep or whatever then hit scan button under audio devices it should pick it up and then your paired and if it asks you for a security code almost always default is 0000. good luck dude.
 
Back
Top