honda civic rotor swap problem?

  • Thread starter Thread starter Gregg E
  • Start date Start date
G

Gregg E

Guest
best way to change the rotor on a 97 honda civic dx. has some type of pin thru it and cover making it hard to take off and change. any help. tricks?
talking bout swaping the electrical rotor under cap. not brakes. held in with cotter pin but under a plastic cover that i cant seem to get off unless the rotor is off. any tricks?
 
this is a safety cotter pin to keep bolt on axel. just straighten end and pull out. best to get a repair manual or go online to auto zone web site under repairs and do abit of studying first, so you do not screw it up or create a safety issue.
 
I am assuming you are talking about the cotter pin in the retaining nut. Simply straiten the pin and use needle nose pliers to remove the pin. Brake rotors are fairly strait forward and easy to replace, Using the correct tools. If you feel you might make a mistake, in general it can help to take pictures of the assembly as you go.
 
I am assuming you are talking about the cotter pin in the retaining nut. Simply straiten the pin and use needle nose pliers to remove the pin. Brake rotors are fairly strait forward and easy to replace, Using the correct tools. If you feel you might make a mistake, in general it can help to take pictures of the assembly as you go.
 
I am assuming you are talking about the cotter pin in the retaining nut. Simply straiten the pin and use needle nose pliers to remove the pin. Brake rotors are fairly strait forward and easy to replace, Using the correct tools. If you feel you might make a mistake, in general it can help to take pictures of the assembly as you go.
 
Back
Top