Helpme With Dead Siemens 3618

  • Thread starter Thread starter alhaddare
  • Start date Start date
A

alhaddare

Guest
Hi Master, plz help me to make my Siemens 3618 (ME45 Chinese Version)
Work again.

I already flash with VKlay, Unisiemens with s45iv0403xx file but still Dead
Plz help
 
First of all use full backup of an me45 or s45 but not from s45i. It should be 6MB. European phones have a 2MB and a 4 MB flash chips. Chinese 3618 has two 4MB flash chips, 8MB in total.
You should flash the first 2MB of your 6MB backup twice in two parts of your first 4MB flash chip, and the rest 4MB of your backup into the second flash chip, your phone should work. At least this way I reanimated a dead 3618.
If I remember correctly the addresses, try to flash your backup once with startadress
0x200000 and then with 0x400000.
Please, post your results here.
 
I have downloaded fubume45v28 from the internet, can i use this?
My phone condition now when push the power button there is the beep sound from the speaker
 
If you did all I wrote before with that firmware, everything you have to do is to unlock/repair IMEI by freia.
 
I did all before u tell me. I use v_klay to flash,....bla...bla then use other way...keep dead. Then i wrote to this forum.The Last time i did was flash the phone with winswup 3618 v 21. Now when i push the power button the phone still dead but i hear the beep sound from the speaker "teet", and when i try to turn into service mode, the lcd blocked. No sign of Service Mode. I use freia until build15, keep cannot change/unlock/repair IMEI, FREIA say "update not accepted". I think the eeprom area is damaged. The last thing i need if you have EEPROM file for 3618 v 21, or fubu 3618 any version. I will help me much sir. Or maybe i'll try ur way first. I will write down here what happen then. THANK U for everything
 
I have two part of flash file now, spiltted from the 6MB, 2MB start from 0 and 4MB started from 200000. The original file is ME45FUBUV.28.fls (downloaded from internet)
What software to flash? Freia? with custom input?
Cause the address u tell me is different from other people told me, (like RIZAPN, Hrushka) they posted in here. Plz make sure the address to write. BG & THANK U
 
Back
Top