Help with Sanyo 3100

H

HulaForever

New member
Can any body help me out. I am trying to get the spc code out of my 2 Sanyo 3100 and i used uni-cdma and read the memory at 0x01800000 and i went to 33284 and the nuraber was 000001 and 000000. Neither of these are the spc code. I went back and did 3 other 3100 's and it showed me the correct spc code. why is this one not showing me the correct spc code. Is there a diiferent address to look for. I did try every other sanyo address that i know of and none of those worked. Maybe a unlocker that works on the 3100??? Thank in advance for any help.
 
I had the same thing on one i did, click find next again, and you should find another set of the same thing, except 000001 and 000000 may be the real otslc and spc codes. I dont know how that happened. Another thing is to try to reset the phone in the security menu, then try again.
 
Just keep trying. use address 0x01800000 at 1703936 and use note pad and just keep looking. I had the one that I was going to part out but did this and got.
 
trevordre is correct. Thanks to this thread for the help.

I just flashed a Sanyo 3100 from Qwest to Cricket

At first I had no results reading the SPC code. I reset the phone to default settings.

Then I used 0x01800000 for 1703936. I wasn't able to find it with anything less. Also using notepad to Edit Menu - 'Find' 33284. (I had to hit 'Find Next' twice)

The lock code (last four digits of the previous phone nuraber) where pretty close to the SPC code. You could 'Find' the lock code which will get you close to the SPC code. Also I noticed that SANYO was also on the same line as the SPC code. I would have been able to 'Find' the SPC line using SANYO as a search word.

At first I loaded the evdo prl. That didn't work :P of course so I loaded a different prl. That worked fine.

For NAM programing ##SPCcode# worked great. I changed the MDN to the Cricket MDN and the MSID to the Cricket MIN.

I did *228 then power on / off.
 
Back
Top