Help me pls how to flash A60 with Joker

  • Thread starter Thread starter numdang
  • Start date Start date
N

numdang

Guest
Anyone can help me.
I cann't understand how to flash my phone with joker.
I already download joker and a60 flash file,but I don't understand
how to connect my phone and joker.
What is cable to connect?

thx
 
You need to cut testpoint to be able to flash the phone.

And cable use an C55 made in china cable (no original Siemens one!)
 
I got a question: I want to flash my A62. When the phone don't need to cut the testpoint as it is on A62 and only need connect testpoint to ground, do the testpoint have to be connected to ground during the whole flash (unlock) procedure or when the phone boot have to release the testpoint ? Thanks
 
Ok thanks Chris02 for the fast answer but i don't want to cut it. In Siemens Testpoint Selector i saw the testpoint that i have to connect to ground but I don't understand that do i have to keep it connected to ground during the whole flash procedure or i have to release it in some moment ?
 
But for A60 there is no TP for connection to GND, belive me!!!

If you don't want to cut TP you do want to flash your phone....very simple!
 
Yes i believe you, that A60 has no testpoint for connection to ground, but i am asking for A62, not for A60.
 
Dear mate, Siemens TestPoint Selector has a few mistakes, and that is one of them! Believe Chris02, and believe me too, if U want to flash A62, U MUST CUT TESTPOINT!
The easyest method is to cut like A55, remove the keyboard pad wich is glued on the PCB, put under the PCB a good light, and you will be able to see the track you must cut. Good Luck!
 
Back
Top