To restore the lost adjustments of the voltmeter in Siemens C35/M35/S35 to you it is necessary to have: program Siemens Sensors Tool, the digital voltmeter, and there is some patience. The essence of adjustment in achieving conformity of pressure VBattery and a real pressure on the accumulator, measured by the digital voltmeter. Adjustment is made by change of cells 0000, 0002, 0004, 0006.
Before the beginning of all procedures keep the current adjustments of the accumulator! Connect phone to a computer start program Siemens Sensors Tool check up that phone is switched off shortly press the button of inclusion of a feed on the screen of phone the inscription - service mode should appear, the program counts the data from your phone, now that them to keep press button Write File
If something will go not so, you can return to initial adjustments, having pressed key Read File and having loaded a file with adjustments kept earlier. The data enter the name in phone button WritePhone after that to see changes it is necessary to reload phone, that is to switch off and enter in service mode anew.
Adjustment the First stage - the battery is unloaded. A pressure on the accumulator: 3,6?... 3,7? it is necessary to achieve conformity "accumulator - Vbattery" changing value in cells BattMin (0000, 0002) the Example: the battery voltage, measured by a tester, is equal 3.55V, the value which has been read out from phone, VBattery=4,05V. A conclusion: phone overestimates indications, it is necessary to reduce factors 0000/0002 so that VBattery became equal 3.55V. Remember! All changes occur only after restarting the phone.
The second stage - the battery is charged. A pressure on the accumulator: 4,1V... 4,2V it is necessary to achieve conformity "accumulator - Vbattery" changing value in cells BattMax (0004, 0006) In an ideal the pressure on the accumulator at any time should be equal always VBattery. The this conformity will be more exact, the will work more correctly charging moge and the battery size indicator.
