GX29 flashing ...

Right shahzaadbutt. But, irfanmajeed, dont forget to make backup of the original software of the phone. In case the unlock by the unlocked diag will not work, you have to flash him completly. I have full flashed, those days, a 200704 gx29 with the firmware from my above link, wich is from 200606 and the phone is working, after trying diferent newer, but not exactly versions of unlocked diags and firmwares. Try it, maibe you will have luck.
 
I have the same problem than someone here had, I cant install the driver, it fails on n INF section, I have the original sharp drivers posted here, installed already, the modem has a com port Com19, no prob, but in flash mode the driver doesn't install

any trick ?
 
I cant Edit my own post past 10 minutes, sh*t
Well, I pointed the hardware wizard to the folder where the original sharp drivers were installed, at program files\SHARP....drivers\win2000

the installation sarts, but makes the same error on the Inf Section.

any hint ?
 
**************************************************
Her frend and dont forget to copy past gxdlusb to c:windows/system32/driver

then go install driver manually your pc must ask u 4 driver gx xx twis 2 time





good luck
 
Yes, I had figured out that already, thanks anyways

Thats what I did that make it work, I copied the .sys file to the system32\drivers directory and tried to intall the driver included on the Drivers folder which comes on the Flasher Archive, and it got intalled.

For thos of you who may be scared because of the phone disconnecting and connecting itself, dont worry, when the flasher start to read or write the phone it wont happen again until it finishes, this is confirmed 100% to be true

I figured out also that the same software do Reads the FW, FS and Diag, so I read a full backup just inc ase.... and I needed !!!

I flashed the unlocked Diag of the posted 200606 archive on my 200604 phone, and after finish it, result: Phone Dead, so, be careful !!

I just flashed back the original Diag and phone came back to life, so: BACKUP BEFORE FLASHING ANYTHING, YOU HAVE BEEN WARNED

Then I flashed all the stuff, Program(FW), Filesystem(FS) and the Diag included on the archive, and all worked nice, phone is now UNLOCKED.

Good luck

just my .2 cents
 
The best explanation, from someone who knows how to do it. For the people who are asking for the procedure, this post is the best to describe it. I have to learn english and to be a good teacher, to do this the same like @yurays. Thanks for the good intention and for the veto of the procedure.
 
Back
Top