GUIDE: How to flash M8800 Pixon

  • Thread starter Thread starter kronos1
  • Start date Start date
Is it possible to flash F480 with this firmware? Did anybody try to do this? What's the consequence? "freeze" "dead" or full operating?
 
NO THE TOCCO HAS DEFERENT FIRMWARE so ther is another theme in this forum with instructions for Tocco, it is no possible to import firmware of Pixon model into Tocco model..


Can any one please post what the improvements are with this newest firmware?'
 
Try using another USB Port

If it still does not work, try another computer.
Just put everything on to a USB Memory Stick / Flash Drive for easy transfer of files
 
Being that this was copied from my site, Its only fare I post a link to the updated page.....


http://darkforestgroup.com/forum/index.php/topic,2.0.html
 
kronos1 said:
OK this is the start and l hope that you all will consider and post any newer information.


4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

quote]

The "Volume-" button is on the Right side of the Pixonn. I did try it though (pressing all 3 at te same time) and it didn't work. I also tried the camre button and the power button with all other buttons sa combinations and nothing. Please help me,
Click to expand...
 
New Multiloader 5.56

http://www.4shared.com/file/108661971/26431632/MultiLoader_V556.html
 
Press volume down button,then camera button,and while you are holding this two press power on button...and wait for 5 seconds(or until multiloader screen appears) ..
 
Sorry l definitely forget to place link in the post, unfortunately not all is copied because links to the download area didn't worked on darkforestgroup, but still BIG THANK TO THE DARKFORESTGROUP FORUMS!
 
I used Multiloader V5.50 for flashing Samsung M8800 with chosen option "BOOT", and now the phone is dead :/
 
to put your m8800 in download mode just press volume down and power on
that's it
no 3 or 4 keys at ones
 
after doing the procedure... the phone is not loading booting up..

but the multiloader says... wait reset! then the phone shuts down.. and didn't continue loading up.. multi loader says port error therafter...

whats going on? what if i forgot to select Factory FS? or other selection? pls help.. how can i return back to my old phone setup/settings..
 
I do not know where to post this...
But the first to say is that this site is awesome...
Second, the unlock procedure to unlock a samsung m8800 with ust pro II is connecting the phone to the e210 cable, just then connect the cable to the box, and then connect the cable to the COMPUTER USB PORT( because of power), before install the usb driver. Just after this click on fast unlock and it is done.

AntoniWilson, first post!!
 
m8800l is like f480l and there is a problems with flashing this models,try to look in f480 flash guide to see have there is solution .

but if this helps here is:
M8800L Firmware - Only Works On M8800L

http://www.4shared.com/file/110132352/b8fefe03/M8800LUYIE1.html
 
please state the all process of uploading...first time l forget to check the boot and my phone was dead to..but then second time l did it all like in the first post and success everything was ok
 
Here is new one,latest firmware for Pixon,please test all main performance like camera(photo quallity,video) speed of ussage in menu and what else...

M880BXXIE1


http://www.4shared.com/file/108845043/2319ba15/M880BXXIE1.html
 
same case with me? what should i do guys? how to revert... the phone is not booting up... anymore
 
Back
Top