front brake problem with a kawasaki 300 4 wheler?

  • Thread starter Thread starter willbonar
  • Start date Start date
W

willbonar

Guest
bleeding them can be a bear, the best luck i've had is to use 2 people, 1 to pump the handle and the other to manually bleed them. take the the bleeder screw all the way out (one side at a time). have someone squeeze the handle and keep it in, next put your finger over the bleed hole and have them let out the handle, then take off your finger. Repeat that untill you get no air and a steady strem of fluid squirting out, next one more squeeze of the handle, have them keep it in and replace the bleeder screw. Now move on to the other side.
 
i just bought a 4 wheller and the front brakes are not working i cleaned out all the lines and tryed to bleed them but it seems the brake handle is not makeing enough presure. any advice on what to do and a good procedure to bleed the brakes. please
 
bleeding them can be a bear, the best luck i've had is to use 2 people, 1 to pump the handle and the other to manually bleed them. take the the bleeder screw all the way out (one side at a time). have someone squeeze the handle and keep it in, next put your finger over the bleed hole and have them let out the handle, then take off your finger. Repeat that untill you get no air and a steady strem of fluid squirting out, next one more squeeze of the handle, have them keep it in and replace the bleeder screw. Now move on to the other side.
 
Back
Top