Free Z105 Complete Solution

  • Thread starter Thread starter duskor
  • Start date Start date
Happy new year to all unlockers...

Thank you skazi and Angelo for the good solution of the Z105.

I have not tested all the Procedure, but I think it works, becasue I have make all the steps before with the cutting green wire and Unite the 2-3 pin to it, but I have not think about to remove the 2-3 pin cable again.

I will post result when I test it.

Happy New Year to all.

Thamer
SMA Sweden Mobilephone Accessories
www.swedenmobile.com
 
its not so easy to restore call date & rebuild IMEI.Winimei its not enagh to make that operations.U need much more.
 
Best Solition Man!
Its working , tested also by me
Thankx for the solutions.
Best Regards...
 
Start Unlock the phone...
Check Serial Communication with the phone. Wait ...
Seial COM. - GOOD
SUCCESS: DETECT USB PORT...
Searching SAMSUNG Modem...
USB Port Open Fail


WHAT is the SOLUTION for the ABOVE Problem.. changed PC but problem is still the same..

What is the SOLUTION?



THANKS and Regards,
Abdul Wahab.
 
solution works fine for me
tested on few phones,
if direct unlock doesn`t work,
just read codes and do it manualy
WBR
Deki ProfiTel
 
yes, work ok, tested Z107v..just make good cables with cables S100..
regards
Rubin

Best regards,
Rubin & Miki team from Macedonia
+38948419351
+38975562450
+38970536058
icq 347179449
mailto: [email protected]
 
@Mods
I need the chinese flash file for the Z105u samsung 3g phone very badly, the phone had chinese language it in i tried to load french, now the phone only blinks, so can u pls post here or infom whr i can download it?
WBR
AE177
 
What I need?

Just for Info, Have you pinout of that phone? or can you tell me where I can found it?
Thanks
Regards
 
There is no need to cut the green wire (D1) of USB cable , only need to connect COM 1 DB9 pin 2 (TX) and 3 (RX) together, or you can even use MBUS cable for this purpose .

It works with no problem at least for me .

Happy New Year for all :-)

Portugal is with countries affect by the damn tsunami :-(
 
Software works with USB cable, you can easily build one (there is no interface, is directly connected from pc to phone) , just use an USB extension , cut the female USB connector and put a S100 connector using this pinout:

http://webuser0.s23.deinprovider.de/Software/z105cable.zip

USB driver is inside z105.rar

http://webuser0.s23.deinprovider.de/Software/z105.rar
 
PLEASE HELP
i try all solution make USB nomal cable and connect DB9 PIN2-3 and green line to pin 2-3 DB9 i got error is
ERROR DETECT USB POST TIMEOUT !
if i removed Green line and when com ok i got error is USB PORT FAIL
pleaase help
 
tried 98 still no better but at least in 98 i can get to change com port . This is a success story as you said USED ANOTHER COMPUTER WORKED FIRST TIME
 
Back
Top