final solution to unlock C75 0% risk enjoy

[ics_igrec_zet]

Tested and working, solution is good
BR, xyz

 

[yargich]

that is all ok but don't write phone see this picture help me pls thx for all

 

[rudyab]

Me too. I 've got some problem like yargich did.
Anyone can help?

 

[tunscomm22]

please help i can not unlock c75 here is what i get
Boot not loaded!
Boot released.
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
Release SKEY from phone...
SKEY released!
SecurityStatus: CustomerMode
Checking values entered...
Block EEP76 saved.
Cannot create block EEP5008!
Awaiting answer from Chaos midlet...
No answer from midlet!
1) Neglected to run midlet px65v5 in phone...
2) At request "Connect Accessory" press button "Px65v5" and connect cable to phone.
3) Wait for the midlet to finish and again press button "Px65v5"...
*Midlet can be found at http://chaos.allsiemens.com/download/px65v5.rar
Awaiting answer from Chaos midlet...
No answer from midlet!
1) Neglected to run midlet px65v5 in phone...
2) At request "Connect Accessory" press button "Px65v5" and connect cable to phone.
3) Wait for the midlet to finish and again press button "Px65v5"...
*Midlet can be found at http://chaos.allsiemens.com/download/px65v5.rar
Awaiting answer from Chaos midlet...
No answer from midlet!
1) Neglected to run midlet px65v5 in phone...
2) At request "Connect Accessory" press button "Px65v5" and connect cable to phone.
3) Wait for the midlet to finish and again press button "Px65v5"...
*Midlet can be found at http://chaos.allsiemens.com/download/px65v5.rar
Auto Ignition...
Boot not loaded!
Boot released.
Awaiting answer from Chaos midlet...
No answer from midlet!
1) Neglected to run midlet px65v5 in phone...
2) At request "Connect Accessory" press button "Px65v5" and connect cable to phone.
3) Wait for the midlet to finish and again press button "Px65v5"...
*Midlet can be found at http://chaos.allsiemens.com/download/px65v5.rar
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
No answer from phone !
Check port number, cable, phone, mode!
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
Release SKEY from phone...
SKEY released!
SecurityStatus: CustomerMode
Awaiting answer from Chaos midlet...
No answer from midlet!
1) Neglected to run midlet px65v5 in phone...
2) At request "Connect Accessory" press button "Px65v5" and connect cable to phone.
3) Wait for the midlet to finish and again press button "Px65v5"...
*Midlet can be found at http://chaos.allsiemens.com/download/px65v5.rar
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
Release SKEY from phone...
SKEY released!
SecurityStatus: CustomerMode
Checking values entered...
Block EEP76 saved.
Cannot create block EEP5008!

 

[gyuszko]

Man, why do you release Skey when you are already in Factory Mode?
Correct eeprom fields can be modifyed only in Factory Mode.