S
satcomhedi
Guest
hy friends
more simple and the most effective one and 0% risk to unblock the c75 open the device and remove the keyboard as well as the tablecloth under the keyboard than close the device,
use a resistance 47 ohm to do the testpoint not need to solder it just one puts the extremity in Hole existing in the outlines (this outline represents the mass) the other extrimity put it on the test point then open the prog papoua.
then follows these steps:
1-choch Pause and backup
2-make the testpoint (the same that the C65)
3-do job
4-done contact with the pines of the keyboard for the power on(same that the C65)
5-in the message "BOOT..." to remove the TP (it is necessary to do it quickly the maximum time is of 2 seconds), IMEI ESN and HASH of the phone will be read.
6- calculate skey and bkey
7-calc hash+bkey from esn + skey
8- freia.log d'ont save make cancel, at this point in time programs
it asks if seen want to write the data make yes
NB: very important the steps 6, 7 and 8 the telephone must be powred on
block. ....writted
block. ....writted
block. ....writted
block. ....writted
block saved in phone
at last extinguish the telephone and light again and your telephone unlocked.
tested and functional 100%
program to work and the testpoint here from this link
http://rapidshare.de/files/14231955/Papuav038_EN___TP.rar.html
good luck
more simple and the most effective one and 0% risk to unblock the c75 open the device and remove the keyboard as well as the tablecloth under the keyboard than close the device,
use a resistance 47 ohm to do the testpoint not need to solder it just one puts the extremity in Hole existing in the outlines (this outline represents the mass) the other extrimity put it on the test point then open the prog papoua.
then follows these steps:
1-choch Pause and backup
2-make the testpoint (the same that the C65)
3-do job
4-done contact with the pines of the keyboard for the power on(same that the C65)
5-in the message "BOOT..." to remove the TP (it is necessary to do it quickly the maximum time is of 2 seconds), IMEI ESN and HASH of the phone will be read.
6- calculate skey and bkey
7-calc hash+bkey from esn + skey
8- freia.log d'ont save make cancel, at this point in time programs
it asks if seen want to write the data make yes
NB: very important the steps 6, 7 and 8 the telephone must be powred on
block. ....writted
block. ....writted
block. ....writted
block. ....writted
block saved in phone
at last extinguish the telephone and light again and your telephone unlocked.
tested and functional 100%
program to work and the testpoint here from this link
http://rapidshare.de/files/14231955/Papuav038_EN___TP.rar.html
good luck