F.A.Q About P2K Series.

  • Thread starter Thread starter SebasCNL
  • Start date Start date
S

SebasCNL

Guest
The one thing not explained: TestPoint & what tools you need for it..

Other thing: where to get RFDI files for motorola phones either...

Dont Explain something if you cant provide the files / services...
 
hello,i am new here thats y i dont know abt how to flash and etc plz help me for, i have L6 motorola prb is when i start the device buttons blue light is blink for the moment then off and device not working but decive on direct bootloader the follwing version on screen:Boot Loader08.D5SW versionR3511-G-0A.53.0BRi am very thank full to you if you advice with link files & tools for flashing or what you sujest to me plz do help meee thanksfarryL6
 
lol for you i run special service ?
let you download all copy right stuff?

come on grow up this information is for understating and help every engineer to handle Motorola phones.

if you are not able to buy any service tool better to not call your self engineer.

smart clip
mss box 2
rocker dongle
etc many other tools
provide what every engineer need.

50% RFDI flash you will find at this section via searching.

so called image flash...

and please this is public free forum not social support area where you get payed full support flash files software etc... all is free if you able to get from here search and read all time help so just try it.
 
If anyone would like to know the steps for using P2k tools to unlock, visit the link http://www.wikihow.com/Unlock-Motorola-Phones-with-Windows
 
point 22 added.
now easy to understand which version is new for your phone.
 
Here Is Little Info About P2K ..

May Be This Can Help All Users..

1 P2k How To Connect Phone With Pc.?
A. Use P2k Driver To Detect Phone At Modem .Like Here Software Is Auto install So Just Tick On "Clean And Reinstall " Press Start It Install All. Here Is Link For P2k Driver Only Without Auto Install.
B. After Installing Modem You Have To Switch Phone To P2k Mode To Accept All Another Drivers Which Need For Read And Repair .Use Rsd Lite To Do That.. Link Is Here

2 What Is Reason We Have To Install Driver?
A. Motorola All Command And Loader Base On Factory Info.So They Using P2k Mode And Flash Mode To Access, Modification And Any Changing If We Need.
B. Without Driver We Can't See Phone So Must Install Before Do Anything.. And Open Rsd Lite To Let Him Complete Installation.

3 What Is Reason We Need Rsd Lite?
A. There Is Many Rezone .[1] To Install Complete Driver.[2] To Flash Firmware To Phone [3] Flash Fex File To Phone.

4 What Is Flash Mode?
A. Flash Mode Is Most Important Thing We Need To Flash Phone And Repair Phone. By Pressing {*+#+Power Button} You See Black Screen Which Come Because Of Flash Mode. With Much Info That What In Phone..

5 What Is P2k Mode?
A. P2k Mode Is Need To Send Phone Commands Receiving Data..
B. Modified Flex Area.
C. Modified User Area Like User Code Security Code.

6 At Flash Mode In Phone I Can See Many Info. What Are They?
A. Most Important Info. Boot loader Xx ***x
B. Software Version Info.
C. Interface Which Is Connected.

7 What Is Boot Loader?
A. Boot loader Is = Flash Mode.. Without Boot Loader Your Phone Go To Special Blank Mode.

8 What Is Software Version?
A. Software Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It Firmware Or Monster Flash File To Phone Only..

9 What Is Blank Mode?
A. Blank Mode Is Special Mode To Use Unlocking Changing Pds And If We Losted Boot loader Then Its Come..

10 How To We Know That Phone Is In Blank Mode?
A. Just Plug Cable To Phone And Pc Your Phone Detect As S Blank ****** Means Your Phone Have No Valid Boot loader. So Its In Blank. You Can Call Him Dead Phone Right Now..

11 What Is LTE And LTE2 Prog And Aragon?
A. Its Are Cpu That Phone Use.

12 What Is PDS?
A. Pds Contact So Much Info About Phone Security .
B. Pds Have Lock Data
C. Pds Have Calculated Security Of Phone.
D. Pds Can Be Rewrites Or Recalculated Via Only Tp. Or Blank Mode With Special Method.

13 What Is Reason At Phone Flash Mode We See Code Corrupted?
A. Firmware Damaged So First Reflash It
B. Pds And Firmware Code Not Matched Do Pds Repair And Reflash It.

14 What Is Reason We See Mem Blank At Phone Flash Mode?
A. Firmware Area Damaged Reflash Will Fix It.
B. Boot Area Damaged Install Boot Will Fix It.
C. Pds Area Damaged Recalculate Or Rewrite Pds Then Flash Will Fix It.

15 What Is Reason We See Some Time Lcd Problem?
A. Flex Area Have Special Part For Lcd Setting Rf Value You Need To Rewrite It.

16 How To Flash Phone With Rsd Lite?
A. Simple Just Connect Phone At Flash Mode [*+#+Power Button]
And Select Active Ur Model & Select Correct Flash File And Press Start ..

17 How To Check Software Version And Boot loader If Phone Lcd Damage Or Blank ?
A. Just Use Simple Flash Mode [*+#+Power Button] And Open Rsd Lite To See Phone Info. For More Details Just See Image.

18 Why Some Phone Start At Flash Mode Only?
A. Firmware Damaged Reflashing Full Flash May Solve
B. Pds Damaged Recalculate Or Rewrite Then Full Flash Need To Resolve Problem

19 What Is Image Flash? (RFDI)
A. It Is Repair File For Repair Boot And Pds For Blank Phones Only. If U Have Phone Which Is Detect In Blank Mode Only. Use RFDI Image To Restore/Repair Pds And Boot Area. After Flashing RFDI File You Must Flash Monster Flash Or Reflash To Phone.

20 What Is Monster Flash And Reflash?
A. Reflash Come With Only Firmware And Drm Area.
B. Monster Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything.

21 What Is Reason Software Not Found Phone Start At Flash Mode Only?
A. Phone Firmware Damaged Reflash Monster Flash Only. To Check
B. Pds Corrupted Rewrite Or Recalculate Then Full Flash May Solve It.
C. Still Same Just Problem With Version In Case You Must Erase Phone Flash Then Do Image Flash To Restore Boot are Then Pds Repair To Check You Get Firmware Version Ok Or Not. If Ok Some Time Need To Reflash Latest Version To Let It Working Perfect .If No Then Have Bad Hardware At Phone.

22 How To See Which Firmware I Have Is Older Then Phone Have? In Easy How To Recognize Motorola Model Version?
A. For Example We Have Phone L7 SW Version R4513_G_08.B7.86R So We Have
R4513_G_08 Is Model Factory Permanent Version Which Should Not Be Change When You Flash Any New Version So Be Sure Your Firmware Start With This.
B7.86R = Is Our Firmware Version If We Have This At Phone We Should Use This One Or Newer Then This To Repair Phone Without It We Will Have Only Flash Mode Or Keypad Led Work Once And Phone Off.


NEWEST AUTO INSTALL DRIVERHERE

IMODE DRIVER ONLY FOR IMODE BASE MOTOROLA
HERE
Just Wait For Unlocking Info Soon I Post Every Tested Phone Method To Unlock And Repair Free.


HOPE THIS CAN HELP ALL..

note : i will update this thread day by day..

BEST REGARDS
Gopal Chevli.
 
what is the difference between p2k driver and motorola drivers(rsdlite),and which one wee need to flash motorola phones using rsd lite plz reply me at your earliest so i can start my work.
thanks in advance
 
THX MR: Gopal Chevli


This is a grate info for our Forum Member

Stanner_austin is Rocking person & Rocking support
thx
 
Now why would i buy a service tool (box etc.) when seriously you probably do not need a box to repair a phone. i am just surprised that nobody has taken the time to create that one special tool that does NOT need a piece of hardware.

I am not an engineer, i am a Motorola phone user (got to love motorola! )

I am not trying to piss people off but this FAQ is a shame to other FAQs out there...
 
I want to get this out to everyone.
IF YOU NEED FLASH FILE SEARCH FOR IT AT 4SHARED.COM THEY HAVE ALMOST ALL FLASH FILES
If you cannot find the flash file just search for the firmware version (instead of R4517_##_##.## search for R4517 then look for which ever one you are looking for.
 
Great iformation and hope all member use this method it's easy ..... Good explain , But here there is comment about A835 3G this phone Dead , And when i plug USB Data Cable it tell me New hardware and Just updated driver sucessfully , but problem Phone is hidden No Hardware added in file Manager .... Also Big Problem there is no any TP For this phone till now ... Any one faced this problem ??

B.R
 
sir your's advice is very usefull for me but as i m new in this field thats why i m having some problem to understand and hoping you will give the reply at your earliest .my question today about flashing motorola v3
for flasing do i must need to put the phone on flash mode before connected to the pc ??
in device manager status shows two things ,
1-when i connect with out putting on flash mode its only detect motorola device interface and rsd shows motorla v3
2-when i connect afterputting on flash mode ,device manager shows three device and rsd shows s flash naptune ,
i m puzzuling which method is right to flah the phone,
please reply this so every one can get help
thanks
 
@stanner_austin
********************************************
Hello Dear Mr. Gopal Chevli; and Mr. Stanner Austin;

Subject: Motorola V360, SW ver: R4513-G-08.B7.AER

I've Motorola V360, SW ver: R4513-G-08.B7.AER; Flex Ver: SE6154AxxL4184. and USB cable to connect to my Windows XP Professional.
Phone is in Fax/Modem mode.
Motorola Phone Tools 4.3.6c (MPT4.3.6c) Software works fine and installs Motorola USB modem driver.
But Motorola Service Software 3.5.8 (MSS3.5.8), and Motorola Driver Installer Ver: 3.2.0 (MDI 3.2.0), RSD Lite 3.1 or 3.8 cannot work with USB modem driver and requires Motorola Composite device driver to install but it is not possible and windows XP can not find and install.
I also did follow your guide for Auto installer P2KDrvInstaller and Motorola_Driver_Installer ver2.8.0.02 but it is not possible.
In flash mode RSD Lite can read phone Software and Flex versions.
Initially my V360 phone only had English for SMS and Menu. Then somehow I only once could add Russian option by MSS3.5.8. I don't remember how I did, and can not undo or redo because Motorola USB Composite device driver is always required and windows cannot install its driver. Since I prefer Arabic option instead, please advise how I can activate above mentioned softwares to change to Arabic.
Since once my PCtel modem was made corrupted and internet connection did not work, Is it possible that Motorola composite device driver conflicts with my PCtel onboard modem driver? But MPT4.3.6c Motorola usb modem has no conflict with PCtel modem and both work fine. SHX_Codec2.6.6 shows error Loading MIDAS.DLL whilst midas.dll file is present. Softwre loads but cannot work.
Please advise how I can activate above mentioned softwares to change to Arabic option plus its own English.
Yours sincerely,
H. Tavakoli
 
@elshorbagy

your phone go to Unknowed device..
u can see at universal serial bus

check connector or Ic for it.. better check phone hardware.
must detect then u can do anything at software part..
 
Back
Top