E-gold without testpoint 100%

[yobaaa]

the mobile is SX1 &i tried to enter service mode the progrm stops action&send the pravious error message

 

[talel62]

thanks a lott hanks a lot thanks a lott hanks a lot thanks a lott hanks a lot thanks a lott hanks a lot thanks a lott hanks a lot thanks a lott hanks a lot

 

[samirr]

it will be ok but no ring tone no pictures you have to flash file system ffs or full flash wit the same version.
BR.

 

[habibuddin]

Yes, it's old but where maximum user do'nt know this method.so this is
help them.
Thanks for share.
B.R.

 

[johnny_liang]

you can upload your ringtone again using data exchange software.

 

[nishaon]

always something is better than nothing.

 

[mihaser]

Ha! SX1 its not easy.
Steps:
1st: Try to format user area. Just press and hold '*' + '#' + 'Dial' + 'Power' and wait till complete
2nd: Trya to reflash your phone with fullflash. But you need to make testpoint. You can find it at this Forum

 

[Jr Telecom]

OLD solution is not fact
This is learning forum and gives us many Idea,I think, many user,s doesnt know the solution.
So this is usefull post.

All the best.

 

[Rise]

@jrtel_ctg
many user not , new user
@JHON_DREAM
i m not using this forum too much , u just realize that i read ur post today and reply it and this is my prove

 

[reaz.com]

Only those sets which r ""blue screen""(egold).----with jokar
1. Select model, speed, port.
2. Go 2 service mode
3. press del instence within 2 seconds
4. Press ok 2 del all thing
5. Power off
6. power on
7. wait 1 min

quote]

this is only formate......................old solution !
any solution without TP unlock or flash ???????

 

[dreamy_zahid]

ok but to old solution

 

[nishaon]

Yes, good solution when we think something is better than nothing. Keep it up bro.

 

[blueprint]

This is the best way I have tested Ok and with testpoint

Only those sets which r ""blue screen""(egold).----with jokar
1. Select model, speed, port.
2. Go 2 service mode
3. Defrag Eep.
3. press del instence within 2 seconds
4. Press ok 2 del all thing
5. Power off
6. power on
7. wait 1 min

 

[DVD B@ppy]

Originally Posted by master_t2
Only those sets which r ""blue screen""(egold).----with jokar
1. Select model, speed, port.
2. Go 2 service mode
3. press del instence within 2 seconds
4. Press ok 2 del all thing
5. Power off
6. power on
7. wait 1 min

now u can see everything is ok but the ringtone.
Rate the thread.credit goes 2 dvd bappy.
....................................................
Originally Posted by Amir-SkillZ
YES ringtones and PIcs will be GONE....
Thats the main Disadvantage of This Trick
....................................................
Originally Posted by matrix.real
yes ..... good

and dont forget to do DEFRAG EEPROM

it is so old SOLUTION .........
....................................................
Originally Posted by reaz.com
this is only formate......................old solution !
any solution without TP unlock or flash ???????
........................................................
........................................................
Some member of this forum doesnt want to apreciate a free siemens blue screen problem.
When u want to flash cf62 benq v21? A65 intel or amd with v17?,A70 benq v32.
A70 or a75 hang on startup with siemens logo after bad cut.M55 no network after flash,
Mc60 different version.A65 or A62 Confirm button doesnt work after bad cut
Actually martech is best tool for siemens.SSt is not good Because all those problem
is written by me was happend during working with sst
Dream box is really a dream but not coems true

Mainly the credits goes to them who work hard to make Joker and give the world for free

old solution , working 100% written by many seniour members Named(RAMJAN_MOBILE,MaHmUt1982,
LOUAI2005,Amir-SkillZ(main Disadvantage of This Trick but forget to thanks joker),
matrix.real,reaz.com,But unabale to give new sollution about this tropics hear.
I want to say them that
all of the forum cointain old information Usefull information and wrong information
And many unexpert bad adveiser all over the forum

 

[she_mul]

Hi, Friends,
I have siemens A75 set. But it standby with siemens logo. I gave flash but no result. What can I do? Please help me.

By,
shemul.

 

[shahzad-0004]

old solution working 100% thanks



[shahzad]

 

[dagos]

Hi,
to understand what is your problem, give more detailes:
-your phone power off instant or freeze???
-OK key is working (aircraft check control passed)???
-you make firmware update or fullflash your phone? Which file you used?
dagos

 

[conacry gsm]

thanks for share .i respect people that even if old .thanks bro

 

[free_gsmx]

yes good stil is working best job thanks

 

[inspiredron]

Was test point cut? Will it work without cut. Please see my post A60 wants SIM