DYNO Numbers for Baggers???

B

Brianna P

New member
06 SG
103"
Rinehart Tru duels
Andrews 60G cam
08 SE Pro CNC Ported Heads
SE Forged Stroker Pistons
Power Commander

Max Torque 97.94
Max Power 99.87
 
Got my numbers. HP seems low for the amount of TQ that is being made.

103" Kit with SE 255 Cams, Standard Baffle D&D 2-1, SE Heavy Breather, tune.
Horsepower 85.45
Torque 102.60

Waiting for them to send me the graph.
 
Thats the same build as mine except for the fatcat ... the hp is same as mine but the trq is 14 ft lbs lower. I was told by my tuner that i would gain more with fatcat so i dunno whats up with your #'s

If you look at my dyno sheet you can see mine was 104 ft lbs with a canned map and i gained 12 more with custom map.

With the 255 cams your HP looks good as these cams are all about torque
 
Difference could be dyno based. No one dyno is going to read the exact same as another on any given day.

But thanks for posting your results, knowing you have similar numbers puts my mind at ease. I am coming from a car background so I was expecting the HP/TQ figures to be close or the HP to be higher.
 
Well, I scored a 2007 Ultra (96 cc)and found out the emissions were set too lean and engine ran hot. Spoke to a few guys and ended up adding a stage 1 to include the air filter, race tuner and D&D Fatcat exhauset (single header). The dealership said they usually get the best numbers with that exhaust. Tally came in at:

85 TQ
71 HP
 
dynoed 07-04-09

down here in the arm pit of Texas it is HOT today.
102 @ 2pm and 78% humidity
had 3 dyno pulls.
this dyno was an out side dyno.

75.1 hp
93.1 ftlbs
AirFuel Ratio 13.4

a stock 09 touring bike went 62.6hp after me

very happy with the results in the hot air.
i figure it woiuld p/u some in the cool air of course.
 
Back
Top